Target Part/SP No.:Paper Exit Full Sensor (S11) / SP5-803-012 (Tray Full Exit Sensor)
Cause verification | Problem Judgement |
|---|---|
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 1: Full |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 0: Not full |
Solution:
- Reconnect the connector.
- Replace the sensor.
- Replace the Paper Transport IOB (PCB1).
- Replace the harness.
Feeler for Paper Exit Full Sensor (S11)
Cause verification | Problem Judgement | Solution |
Check if the feeler for paper full detection is unfolded at the operating position. (Check that it is not folded.) | The feeler is not in the operating position. | Unfold the feeler. |
Check if the feeler for paper full detection is unfastened. | Feeler is unfastened. | Reattach the feeler. |