If you replace this finisher with one that has a stapleless staple unit, the saved settings such as [Stapling Method for Stapleless Stapler] will not be transferred and the settings must be configured again.

  • To adjust the strength of the crimp between sheets of stapled paper, there is a setting to select either single or double stapling.
  • The crimp is weakened when there is an image (toner) at the point which is to be stapled. There also is a setting to mask the image on the point for stapling, in order to prevent the crimp from being weakened.
  • Depending on users demands, explain the settings/methods of the settings by checking the following instructions.

How to Change the Setting of Staple Method for Stapleless Stapler
  1. Press the [Settings] icon on Home screen.
  2. Press [Machine Features Settings] > [System Setting] > [General Setting] > [Stapling Method for Stapleless Stapler].
  3. Select [Double] or [Single].
How to Set Margin Erase for Stapleless Stapler
  1. Press the [Settings] icon.
  2. Press [Machine Features Settings] > [System Setting] > [General Setting].
  3. Press [Erase Margin for Stapleless Stapler].