Target Part/SP No.:Tray Set Switch (2nd Feed Tray) (S21) / SP5-803-020 (Tray 2: Set Sensor)
Cause verification | Problem Judgement |
|---|---|
Manually press the referenced switch (Done after detaching paper feeding tray 2 from the machine.) | 1: Not set |
Pull out paper feed tray 2 from the machine. | 0: Set |
Solution:
- Reconnect the connector.
- Replace the sensor.
- Replace the Paper Transport IOB (PCB1).
- Replace the harness.
2nd Paper Feed Tray
Check the 2nd tray set sensor to see if there are any defects. | Replace the 2nd paper feed tray. |