Be sure to execute color registration and auto color calibration when installing the machine.

Color Registration

  1. Press [Settings] on the HOME screen.
  2. Press [Machine Features Settings] > [Maintenance] > [Color Registration].
  3. Press [OK].
  4. After the adjustment is complete, press [Exit].

 

Auto Color Calibration (ACC)

Do the "Auto Color Calibration (ACC)" for the copier mode & printer mode as follows:
- Copier mode -

  1. Press [Settings] on the HOME screen.
  2. Press [Machine Features Settings] > [Maintenance] > [Auto Color Calibration]
  3. Press [Start] for Copier Function.

  4. Press [Start Printing] to print the test pattern.

  5. Clean the exposure glass.
  6. Put the test pattern on the exposure glass.

  7. Put 10 sheets of white paper on the test chart. This ensures the precise ACC adjustment.
  8. Close the SPDF/ARDF or the platen cover.
  9. Press [Start Scanning].
    The machine starts the ACC.

- Printer mode -

  1. Then, Press [Start] for Printer Function.

  2. Press [Start Printing] to print the test pattern.

  3. Press [Quick Test Pattern], then press [Start Printing] to print the test pattern.

    The test pattern is printed after self-checking.
  4. Put the printout on the exposure glass.

  5. Put 10 sheets of white paper on the test chart. This ensures the precise ACC adjustment.
  6. Close the SPDF/ARDF or the platen cover.
  7. Press [Start Scanning].
    The machine starts the ACC.

  8. Confirm that the execution result is displayed.

    For the Quick Test Pattern, the execution result is recorded with all resolutions (patterns 1 to 5).

    • If the printed image is not adjusted properly after executing Quick Mode, perform ACC with normal mode (test pattern in applicable resolution) again.