Target Part/SP No.:Tray Set Switch (1st Feed Tray) (S19) / SP5-803-016 (Tray 1: Set Sensor)
Cause verification | Problem Judgement |
|---|---|
Manually press the referenced switch (Done after detaching paper feeding tray 1 from the machine.) | 1: Not set |
Pull out paper feed tray 1 from the machine. | 0: Set |
Solution:
- Reconnect the connector.
- Replace the sensor.
- Replace the Paper Transport IOB (PCB1).
- Replace the harness.
1st Paper Feed Tray
Replace the 1st paper feed tray. | Replace the 1st paper feed tray. |