Target Part/SP No.: Transport Sensor (1st Feed Tray) (S13)/ SP5-803-003 (Transport Sensor 1)
Cause verification | Problem Judgement |
|---|---|
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 0: Paper detected |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 1: Paper not detected |
Solution:
- Clean the sensor.
- Reconnect the connector.
- Replace the sensor.
- Replace the Paper Transport IOB (PCB1).
- Replace the harness.
Target Part/SP No.: Transport Sensor (2nd Feed Tray) (S23)/ SP5-803-005 (Transport Sensor 2)
Cause verification | Problem Judgement |
|---|---|
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 0: Paper detected |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 1: Paper not detected |
Solution:
- Clean the sensor.
- Reconnect the connector.
- Replace the sensor.
- Replace the Paper Transport IOB (PCB1).
- Replace the harness.