The "SC Table" section shows the SC codes for controller errors and other errors. The latter (not controller errors) are put into four types. The type is determined by their reset procedures. The table shows the classification of the SC codes.
Key | Definition | Reset Procedure |
|---|---|---|
A | The error involves the fusing unit. The machine operation is disabled. The user cannot reset the error. | Turn the main switch off and on. Reset the SC (set SP5-810-1). Turn the main switch off and on. |
B | The error involves one or some specific units. The machine operates as usual, excluding the related units. | Turn the main switch off and on. |
C | The error is logged. The SC-code history is updated. The machine operates as usual. | The SC will not show. Only the SC history is updated. |
D | The machine operation is disabled. You can reset the machine by turning the main switch off and on. If the error occurs again, the same SC code is displayed. | Turn the main power switch off and on. |