• Remove the Waste Toner Bottle before you remove the Left Cover, so as not to disperse the toner.

  1. Remove the waste toner bottle (Waste Toner Bottle).
  2. Remove the paper exit cover (Paper Exit Cover (with Operation Panel)).
  3. Remove the rear cover (Rear Cover).
  4. Remove the left lower cover [A] (×2).

    • When attaching the left lower cover [A], fit the cover into the hole [B] of the main unit as shown in the figure below.

  5. Remove the left cover [A] (×3).


    • Check the position of the hooks in the photo below before removing.
    • When attaching the left cover, first attach it from the top. Then fit the hooks [A] into the holes [B] of the main unit as shown in the photo below.