1. Turn the main power switch OFF.
  2. Insert the SD card into the lower SD-card slot. Then turn the power ON.
  3. Enter SP mode.
  4. Select "Engine".
  5. Select SP-5992 "SP Text Mode”.
    SP-5992-xxx (SP Text Mode)

    Detail No.

    SMC Categories to Save

    001

    All (Data List)

    002

    SP (Mode Data List)

    004

    Logging Data

    005

    Diagnostic Report

    006

    Non-Default

    007

    NIB Summary

    026

    Printer SP

  6. Select a detail SP number shown below to save data on the SD card.
  7. Press [EXECUTE].
  8. Press [EXECUTE] again to start. Press [CANCEL] to cancel the saving.
  9. “It is executing it” is shown on the screen while executing.
  10. Wait for 2 to 3 minutes until “Completed” is shown.

    • The SMC list saving may take from 2 to 3 minutes to complete.
    • Press [CANCEL] to abort executing.

  11. Press [Exit] to exit from SP mode.
  12. Press [Exit] to exit from SP mode.