- Enter the SP mode and select SP2-109-003 (Test Pattern).
Enter the number for the test pattern that you want to print -> Press [OK].
SP2-109-003 (Test Pattern)No.
Pattern
No.
Pattern
0
None
13
Independent Pattern (4dot)
1
Vertical Line (1 dot)
14
Trimming Area
2
Vertical Line (2 dot)
15
Hound's Tooth Check (Vertical)
3
Horizontal Line (1 dot)
16
Hound's Tooth Check (Horizontal)
4
Horizontal Line (2 dot)
17
Black Band (Horizontal)
5
Grid Vertical Line
18
Black Band (Vertical)
6
Grid Horizontal Line
19
Checker Flag Pattern
7
Grid Pattern Small
20
Grayscale (Vertical)
8
Grid Pattern Large
21
Grayscale (Horizontal)
9
Argyle Pattern Small
22
Wormy Pattern
10
Argyle Pattern Large
23
Full Dot Pattern
11
Independent Pattern (1dot)
24
All White Pattern
12
Independent Pattern (2dot)
Select SP2-109-005 (1: Full Color, 2: Black, 3: Magenta, 4:Cyan, 5: Yellow) to select the printing color.
To change the density of test pattern, select density with SP2-109-006 to 009 for each color.
- If select "0" with SP2-109-006 through 009, the color adjusted so will not show up in the test pattern.
- Enter SP2-109-010 (Side Select), SP2-109-011 (1 Sheet Printing) or SP2-109-012 (Continue Printing), and then press “Execute” to print test pattern.
- Check the test pattern.
- Exit SP mode.