- Pull out the cassette (a).
- Lower the release lever (a).
- Open the lower bypass paper conveying unit (b).
- Lift the handle [A] and open the top tray [B].
- Open the bypass tray (a).
- Remove two screws (b)(M3x8).
- Open the waste toner cover (c).
- Slightly lift up the front cover (a) to release the boss (b).
- Tilt the front cover (a) toward the machine front side.
Then, remove the front cover (a) by lifting it up.
- Make sure not to touch the waste toner cover sensor (S3) (b) when reattaching the front cover (a). If the waste toner cover sensor (S3) (b) comes off, even if you close the waste toner cover, "cover open" will be displayed.
- Make sure not to touch the waste toner cover sensor (S3) (b) when reattaching the front cover (a). If the waste toner cover sensor (S3) (b) comes off, even if you close the waste toner cover, "cover open" will be displayed.
- Open the bypass tray (a) slightly.
- Lift up the bypass tray cover (b) and release two hooks (c).
- Fully open the bypass tray (a).
- Slide the arm (b) to the machine rear side and lift it up to remove.
- Remove two screws (a)(M3x8).
Detach the lower bypass paper feed unit (b).
- Lower the bypass lift plate (b) so that the lever (c) is on it when reattaching the lower bypass paper feed unit (a)
*: The paper is not fed because the bypass lift plate (b) cannot ascend and descend when it is not in the correct position.
- Lower the bypass lift plate (b) so that the lever (c) is on it when reattaching the lower bypass paper feed unit (a)
Pull the hook (a) toward the machine front side.
Slide the bypass paper feed shaft (b).
Remove the bypass paper feed roller (c).
- When reattaching the bypass paper feed roller (c), be aware of the attachment direction.
- When reattaching the bypass paper feed roller (c), be aware of the attachment direction.