1. Lift the handle [A] and open the top tray [B].
  2. Open the bypass tray [A].
  3. Open the waste toner cover [B].
  4. Tilt the operation panel [A] to a vertical position and remove the cover [B].
  5. Remove two screws.

  6. Tilt the operation panel [A] to a horizontal position and slightly lift up the front cover [B] to release the bosses and hook.

    Check the position of the bosses and hook in the photo below before removing.

  7. Tilt the front cover [A] toward the machine front side, and then remove it by lifting it up.

Make sure not to touch the waste toner cover sensor (S3) (b) when reattaching the front cover (a). If the waste toner cover sensor (S3) (b) comes off, even if you close the waste toner cover, "cover open" will be displayed.