• Turn OFF the main power switch and unplug the power cord before replacing the PSU (PCB9).

  • Do not touch the areas outlined in red in the following diagrams when replacing the PSU (PCB9). Residual charge on the board may cause electric shock.

    100 V200 V

 

  1. Remove the lower right cover. (Lower Right Cover)
  2. Remove two screws (a)(M3x8: P-tite)
  3. Remove the screw (b)(M3x8: S-tite)
  4. Release the hook (c).
  5. Remove the power supply shield (d). The screw (a) and (b) are different and secure them at the original place.
  6. Disconnect all the connectors from the PSU (PCB9) (a). (five connectors)
  7. Remove two screws (b)(M3x8).
  8. Release two hooks (c).

  9. Remove the PSU (PCB9) (a).

    • When reattaching the power supply shield (a), insert the lower two hooks (b) into the square holes (c) of the main unit and fasten the upper hook (d). Then, secure it with the screws (e).