There are two ways to set up this function.

  • Meter click charge enabled (SP5-930-001 set to "1 (enabled)"; this is the default setting): The counter can be displayed and printed by the customer. The service representative can then call the customer and ask for the counter.
  • Meter click charge disabled (SP5-930-001 set to "0 (disabled)"): The counter cannot be displayed or printed by the customer. To check the counter, the service representative must print the SMC report (SP 5-990).

Item

SP No.

Function

Default

Meter Click Charge

SP5-930-001

Enables or disables Meter Click Charge.

When enabled:

  • The counter menu shows immediately after you push the "Menu" key.
  • You can print the counter from the counter menu.

When disabled:

  • The counter menu does not show.

1: ON

Meter Click Charge:

Maintenance Kit

SP5-931-001

Enables or disables the PM alert for the maintenance kit.

* This setting is unnecessary with this machine since this machine does not have the maintenance kit.

0: No alert

Counter Method

SP5-045-001

Specifies the counter display method.

  • 0: Developments
  • 1: Pages
  • 2:Coverage range
  • 3: Pages and Economy Color (color count up mode)
  • 4: Pages and Economy Color (B&W count up mode)
  • 7: Coverage (YMC)

1: Pages

Service Tel: Telephone/Facsimile

SP5-812-001, -002

-001: shows or sets the telephone number of the service representative.

-002: shows or sets the fax number of the service station. This number is displayed on the error message screen when an SC occurs.

-