The booklet unit is adjusted for optimum performance before the finisher is shipped from the factory. Do this adjustment only if the edges of folded booklets are not even.

  1. Switch the main machine and do a test run for booklet folding with either A3 or DLT paper

    • This procedure shows you how to test and adjust vertical skew for A3/DLT paper.
    • This same adjustment can be done for other paper sizes as well with SP6201.

  2. Look at the paper and determine what kind of skew (if any is present).

  3. Referring to the diagram, determine if the skew is positive or negative.

  4. Measure the amount of skew.

  5. Enter the SP mode

    • Europe, Asia: Use SP6201-8 (this is for A3 paper).

    • North America: Use SP 6201-15 (this is for DLT paper).

    • The illustration above shows the effects of +/- adjustment with SP6201.
    • The vertical arrows show the direction of paper feed.

  6. Enter one-half the measured amount of skew.

    • Example: If the measure amount of skew is -1.2 mm, enter -0.6 mm

    • The range for measurement is –2.0 mm to +2.0 mm in 0.2 mm steps for every notch adjustment.

  7. Exit the SP mode, do another test print and repeat the adjustment procedure if necessary.