Drive Layout

1

Punch movement motor*1

Operates the left/right and front/back movement of the punch unit.

2

Junction gate transport motor

Drives the transport rollers.

3

Pre-stack release motor

Opens the nip of the pre-stack roller to release the stack.

4

Positioning roller lift motor

Drives the positioning roller that positions paper in the stapling tray.

5

Pre-stack motor

Drives the pre-stack roller.

6

Stapler entrance motor

Drives the rollers that feed paper into the stapling tray.

7

Trailing edge press motor

Operates the pressure plate that presses against trailing edge of the stack on the stapling tray just before the stack is stapled.

8

Corner stapler motor

Rotates the corner stapling for diagonal stapling.

9

Stapler movement motor

Moves the corner stapler front and back on its rail.

10

Booklet stapler motor

Operates the stapler.

11

Base fence lift motor

Moves the entire base fence in the sub scan (vertical) direction.

12

Stack transport motor

Drives the transport rollers that feed stacks into the booklet stapler feed path.

13

Stack transport unit motor

Lifts and releases rollers that feed the stack to the booklet stapler.

14

Feed-out belt motor

Drives the feed-out belt that feeds corner stapled stacks to the shift tray.

15

Leading edge stopper motor

Operates the top fence that aligns the leading edge of the paper stack on the stapling tray.

16

Positioning roller rotation motor

Rotates the positioning roller that positions each sheet of paper in the stapling tray.

17

Jogger motor (rear)

Operates the rear jogger fence that aligns the paper stack rear-to-front on the stapling tray.

18

Jogger motor (front)

Operates the front jogger fence that aligns the paper stack is aligned front-to-rear on the stapling tray.

19

Shift motor

Moves the shift tray to the rear and front.

20

Drag roller motor error

Drives the rotation of the drag roller and also operates the shutter inside the exit fan duct and trailing edge press lever.

21

Drag roller movement motor

Moves the drag roller left and right.

22

Shift jogger fence retract motor

Raises the shift jogger fences during alignment of the front and back edges of the stack on the shift tray.

23

Shift jogger motor

Moves the shift jogger fences forward and back during alignment of the front and back edges of the stack on the shift tray.

24

Turn guide motor

Operates the junction gate in the booklet path.

25

Shift tray lift motor

Raises and lowers the shift tray.

26

Base fence movement motor

Moves the base fence rear-to-front.

27

Trimmings shutter solenoid

Operates the shutter that opens and closes the chute where staple trimmings drop to the staple trimmings hopper below.

1

Fold roller motor

Operates the roller that folds the stack into halves during center folding in the folder unit.

2

Fold plate motor

Operates the fold plate pushed into the center of the stack to start center folding.

3

Booklet stapler bottom fence motor

Operates the jogger fence at the leading edge to align the leading edge of the stack in the direction of paper feed for stapling in the booklet stapler unit.

4

Booklet stapler side fence motor

Operates the jogger fences that align the front and back edges of the stack for stapling in the booklet stapler unit.

5

Booklet stapler motor

Operates the booklet stapler.

6

Booklet stapler clamp roller motor

Moves the booklet stapler clamp roller to release pressure on the stack. Also drives the horizontal fold roller.

7

Booklet bottom fence motor

Operates the jogger fence that aligns the trailing edge of the stack for stapling in the booklet stapler unit.

8

Booklet stack tray motor

The small motor inside the booklet tray that drives the belts of the tray.