The home position of the jogger fences is at the standby position above the paper exit. The arms lower just before a sheet exits the finisher and align the sides of the stack (this is repeated for every sheet).
No. | Part Name: | Function |
|---|---|---|
1 | Shift jogger fence retract motor | Raises and lowers the front and rear fences. |
2 | Shift jogger motor | Moves the front and rear fences forward and backward. |
3 | Main drive belt | Transmits the drive of the shift jogger motor to the gear that drives the relay belt. |
4 | Gear | Transmits the rotation of the main belt to the relay drive belt. |
5 | Relay drive belt | Drives the front and rear jogger fences front and back against the sides of the stack. |
6 | Jogger fences | Open and close to align the sides of the stack as each sheet exits the finisher. |
7 | Shift tray jogger HP sensor | Detects home position of the front and rear jogger fences (wide, away from the sides of the stack). |
8 | Shift jogger retract HP sensor | Detects home position of the front and rear jogger fences (up). |
9 | Shift tray jogger HP sensor actuator | Switches the shift jogger HP sensor off/on. |
10 | Shift jogger retract HP sensor actuator | Switches the shift jogger retract HP sensor off/on. |
The front and rear fences raise and lower repeatedly to jog the sides of the stack as each sheet exits the finisher. After the last sheet exits both arms rise, stop, and then remain up at the home position (standby position). The standard paper sizes that can be jogged and aligned upon exit (with no folding) are the standard sizes A3 to A5, DLT to HLT, 12"x18", 13"x14".