Shift Tray Exit Sensors (Long and Short)

Preparation

• Remove proof tray (Proof Tray)

1. Remove the lift arm [A] (x1)

   

2. At the front, remove the bushing ( x1).

   

3. At the rear, remove:

   [A] Gear (x1, x2)

   [B] Bushing ( x1)

   

4. At the rear, disconnect the sensor harness.

5. Pull it though the hole into the machine.

   

6. Pull the plate assembly out from the front of the machine.

   

7. Lay the assembly on a flat surface.

8. Remove the plate [A].

   

9. Remove:

   [A] Exit sensor (long) (x1, x1)

   [B] Exit sensor (short) (x1, x1)