Preparation

  • The booklet unit weighs about 18 kg (40 lb.) with the booklet stapler installed.
  • The booklet stapler weighs about 3 kg (6.6 lb.)
  • The booklet unit is lighter and easier to remove and re-install with the booklet stapler removed.

  1. Make sure that the stack/staple unit is closed.

  2. Locate the two motors attached to the rear of the stack/staple unit.

  3. Disconnect the two motors , (x2).

  4. Disconnect the connectors of the other harnesses attached to the rear of the stack/staple unit at , , (x2,x3).

  5. Push the stack/staple unit [A] out about halfway, until you can see the two black connectors.

  6. Disconnect the connectors [B] ( x2).

  7. Pull the stack/staple unit out until it stops.

  8. Remove:

    [A] Rear ( x2)

    [B] Front ( x2)

  9. Grip the unit [A] at and , slide it to the right, and set it down on the floor.