Preparation

  • This procedure describes removal of the booklet stapler after the booklet unit has been removed.
  • Actually, the booklet stapler can be easily removed before removing the booklet unit.
  • Removing the booklet stapler from the booklet stapler unit is recommended. This makes the booklet unit lighter and easier to handle.

  1. Remove cover [A] ( x2).

  2. Remove the stapler unit [B] (x4, x1)

  3. Lift the stapler unit [A] out with its handle.

  4. Four sensors are behind the stapler unit:

    Rear jogger fence HP sensor

    Front jogger fence HP sensor

    Bottom fence HP sensor

    Folder unit entrance sensor