Components
Component | Type | Configuration |
Processor | Intel Pentium Processor G4400 | 3.3GHz |
HDD | Serial ATA | 500GB |
SDRAM | DDR4 | 4 GB, 288 pin |
BIOS ROM | Flash | 16 MB |
EEPROM | EEPROM | 1Kbit |
Networking
Ethernet connection requirements:
The Color Controller E-25C network port supports the standard Ethernet network speeds and cable categories listed in the following table.
Network speed | Cable category |
---|---|
10BaseT | Category 3 or later |
100BaseTX | Category 5 or later (4-pair/8-wire, short-length) |
1000BaseT | Category 5e or later (4-pair/8-wire, short-length) |
The network port supports the following Ethernet cable specifications:
- Unshielded Twisted Pair (UTP) cable
- Straight-through cable (patch cable)
Specification | Network port (upper port) | Secondary Ethernet port (lower port) |
---|---|---|
Port function | Connect to LAN | Used to connect to the printerU |
Shielding type | Unshielded Twisted Pair (UTP) | Shielded Twisted Pair (UTP) |
Straight-through or crossover cable | Straight-through (patch cable) | Crossover |
Video Board
The Video Board functions include:
- High speed data transmission
- High speed data decompression
- Engine output at maximum rated output speed
The video interface controls such aspects of the print job as:
- Hardware decompression
- Print quality enhancement technologies
HDD
The HDD is used to optimize many parts of the printing system as well as improving throughput and ease-of-use. The HDD stores the following information:
- System software
- Non-volatile spooled print jobs
- Additional storage for compressed pages
- Non-volatile record of printed jobs (Job Log)
- Resource storage space for downloaded fonts
Non-Volatile Memory
- The 16 MB Flash Memory contains the BIOS, etc.
- The 1Kbit EEPROM holds the MAC address data.
Volatile Memory
- SDRAM is one 4 GB, Double Data Rate 4 (DDR4), 288-pin.