1. Turn ON the copier main power switch.
  2. Turn the main power switch on the E-25C rear panel to ON.
  3. Press and release the soft power push button on the front panel of the E-25C.

  4. Wait for 10-15 minutes. When the diagnostic LEDs remain at '00', go to the copier operation panel and press the Home button.

    • During the 10-15 minutes, the diagnostic LED may remain displaying 'FF' for several times, but this does not indicate an error.

  5. Touch the Fiery icon. "Please Wait!" may be shown on the copier operation panel for a while.
    Within a few minutes, the language selection screen appears. If it does not appear, press the Home button on the operation panel of the copier and touch the Fiery icon again.
  6. Select the desired language, and touch "Continue".
    • Simplified Chinese
    • Czech
    • Dutch
    • English
    • French
    • German
    • Italian
    • Polish
    • Brazilian Portuguese
    • Russian
    • Spanish
    • Turkish
    • Korean
    • Traditional Chinese


    If the desired language is not displayed, switch screens using the buttons.

    The default settings for the E-25C depend on the language selection as follows:

     

    Selected Language & Measurement Unit

     

    English - US

    English - Metric / Simplified Chinese / Czech / Dutch / French / German / Italian / Polish / Brazilian Portuguese / Russian / Spanish / Turkish / Korean / Traditional Chinese

    PS Setting

    Default Paper Sizes

    US

    Metric

    PCL Setting

    Paper Size

    Letter

    A4

    Paper Size System Pages

    US

    Metric

    If you selected "English" at the language selection screen, you are prompted to select the Measurement Unit. Select either "US" or "Metric", and then touch "Continue".

  7. The system will reboot. Press the Home button on the copier operation panel and wait for 5-10 minutes until the Fiery icon appears on the Home screen.

    • During the 5-10 minutes, the diagnostic LED may remain displaying 'FF' for several times, but this does not indicate an error.

  8. Touch the Fiery icon and wait about a few minutes until the Fiery menu screen appears.
  9. Press the Fiery tab to access Setup, and press Setup at the Fiery menu screen.
  10. You are asked to enter the administrator password. (The default password is "Fiery.1".)

  11. Input the customer's settings from the Configuration pages that you printed earlier. If there exists some backup file created from the same E-25C unit, restore it after the network configuration is completed. [Link to Backup/Restore]

    • Ask the site administrator for the other settings that are not on the Configuration pages, You must reboot the E-25C to apply the settings. For more information, see the "Configuration and Setup" manual (http://help.efi.com/ricoh/docs/).

  12. Enable System Updates and Automatic Backup. [LINK to Enabling System Updates and Automatic Backup]