If you are replacing the HDD with a new HDD, allow the site administrator to print the Job Log and save any custom simulation and output profiles. If possible, print the following:
- Configuration pages: Provide records of any installed options and the customer’s current Setup configuration.
- Font List: Lists the fonts currently on the HDD. Along with the fonts provided, the customer may have installed additional fonts.
- Remove the video board. [Link to Video Board]
- Remove the HDD with bracket [A].
- Remove the HDD [A].
- Do not loosen or remove the screws on the HDD covers. Loosening or removing these screws will break the seal and void the HDD warranty.
- Do not touch the HDD with magnetic objects (such as magnetic screwdrivers), and avoid placing magnetic sensitive items, such as credit cards and employee ID cards, near the HDD.
- Place the HDD in an antistatic bag.
For reassembling:
Connect the SATA cable to the "SATA0" connector on the motherboard.
- System Software is not included on replacement HDDs. After installing a new HDD, be sure to install system software [Link to System Software Installation Procedure] and patches [Link to Updates and Patches Installation Procedure].
- If there is a backup file of the same E-25C unit which was formally created with the Fiery System Restore feature with bootable option or Fiery Clone Tool, it is possible to restore the backup file to the new HDD [Link to Restoring the E-25C System Directly with a USB Flash Drive and Service Switch or Restore: Transferring Clone Image Files to E-25C].