• The network settings (protocol, IP Address, etc) and the "Enable Web Service" option should be set to ON (default) in order to access Configure from WebTools.

  1. Open an Internet browser and type the IP address of the controller.
    Supported Internet browsers:
    • Windows: Internet Explorer 11 or later, Firefox 31.0 or later, Chrome 37.0 or later
      In addition, Microsoft Edge is supported for client computers that are running Windows 10 (not supported for other versions of Windows)
    • Mac OS: Safari 7 or later, Firefox 31.0 or later, Chrome 37.0 or later

    • Microsoft releases frequent updates to Internet Explorer. Because support cannot be guaranteed for all versions, use the specified version for best results. On Mac OS, some versions of Firefox may not allow you to enter passwords into Configure. If this occurs, use Safari instead.

  2. In WebTools, click the Configure tab.

    • If a message about untrusted connections appears, or you are asked whether you want to proceed, you can safely ignore the message and proceed anyway. For more information about these messages, see Configuration and Setup (http://help.efi.com/ricoh/docs/).

  3. Log on with Administrator privileges. The default password is Fiery.1.

    • After changing some settings, make sure to click the "Save" button and then click Reboot on the upper bar, to effect the changes.

Stop untrusted connection messages from appearing in WebTools

Actual steps may vary depending upon the PC operating system and the browser version. This procedure is an example for a Windows 7 PC with Internet Explorer 11.

  • The following procedure is an example using the IP address. If the server name is to be used instead of the IP address, replace the term 'IP address' with 'server name' in the procedure.
  • Either the IP address or the server name (hostname) can be used, not both. Please consult with your customer in deciding which to use.

  1. Start an Internet browser and type the IP address of the E-25C.
  2. Click Continue to this website (not recommended).
  3. Click the Configure tab.
  4. If prompted, log on with Administrator privileges: Enter the password, scroll down, and click Login.
    The default Administrator password is Fiery.1 (case-sensitive).
  5. In Configure, click Security > Server Certificate.
  6. Click the Create Self Signed Certificate button.
  7. In the Self Signed Certificate dialog box:
    a) In the Common Name field, enter the IP address.
    b) In the Organization field, enter the name of your organization.
    c) In the Country field, enter the name of your country (for example, use a two-letter country code).
    d) Click Save.
    e) Reboot the E-25C.
  8. On the computer where you want to prevent untrusted connection messages, open Internet Explorer and enter the IP address of the E-25C.
  9. Click Continue to this website (not recommended).
  10. At the top of the browser, click Certificate error then click View certificates.
  11. In the Certificate dialog box, on the General tab, click the Install Certificate button.
  12. In the Certificate Import Wizard dialog box, click Next and then do the following:
    a) Select Place all certificates in the following store and click Browse.
    b) In the Select Certificate Store dialog box, select Trusted Root Certification Authorities then click OK.
  13. Click Next.
  14. When a pop-up indicates the completion of the certificate import wizard, click Finish.
  15. If a security warning displays, click Yes.
  16. When a pop-up indicates the import was successful, click OK.
  17. To confirm, reopen WebTools using the IP address of the E-25C.
    The URL now begins with https, the lock icon is green rather than red, and the lock icon is not crossed out.