• When operating from the printer, the destination of the tracing file is limited to USB memory.

  1. Press the [Home] key on the operation panel of the printer and then press the [TotalFlow] icon.
  2. Press [User Tools/Adjustment].

  3. Press [Save Traces].

    • You can select the tracing items using the [Configure Traces] key.

  4. Insert the USB memory into the front USB port of the print server.

    • It is not recognized in the rear USB ports of the print server.

  5. If necessary, press [Edit] to describe the situation.

  6. Press [OK].

    • It takes about 20 seconds to save the traces.

  7. Press [Save].

    • You can change the file name by pressing [Edit].
    • The tracing file is saved as a .tar file.