• Before doing the following procedure, turn OFF the print server power switch and the printer main power switch, then disconnect the power cords.

  1. Connect the interface cable [A] to the Gigabit Ethernet port of the printer.

  2. Connect the interface cable which is connected to the printer to the Gigabit Ethernet port (bottom) [A] of the print server.
    Connect the interface cable which is connected to a network to the Gigabit Ethernet port (top) [B] of the print server.

     

  3. Connect the power interlock USB cable to the slot on the controller box of the printer.
  4. Do the following three steps.

    1. Connect the power interlock USB cable [A] to the USB port for power interlock on the print server.

      • Make sure that the ferrite core is attached firmly on the power interlock USB cable.

    2. Set the power interlock switch [B] to the EN position.
    3. Connect the power cord [C] to the print server.

  5. Plug the power cord of the print server into the outlet.