Set the date and time in the BIOS or console of the print server after replacing the motherboard.

Setting date and time in BIOS

In order to set the time in the BIOS screen, connect a monitor and keyboard to the print server.

  1. After the print server boots, immediately press the [F2] key.
  2. Select the [Main] tab, and then set [System Date]/[System Time] with the arrow keys and the numeric keypad.
  3. Select the [Save & Exit] tab with the arrow keys, and press the [F4] key (Save & Exit).
  4. Select [Yes] in the pop-up screen, and then press the [Enter] key.
  5. The BIOS screen is closed, and the print server startup sequence is started.
Setting date and time in the console of the print server
  1. Access the print server with the local or remote console.
  2. Click [Stop] to change the status of the printer [Not Ready].
  3. Select [Configuration] [DFE] [Settings].
  4. Set the date and time, and then click [SAVE].
  5. The “Restart” popup appears. Click [Restart].
    The print server automatically restarts.