The print server has a function to interlock the main power with the printer.

By turning this function on in the print server, the print server’s power goes off when the printer is turned off.

When the interlock switch is set to DS, the interlock function is turned off, and when the switch is set to EN, the interlock function is turned on.

Do the following procedure to turn the power on.

  1. Turn ON the main power switch on the printer.
  2. When the interlock switch is set to DS, press the power switch [A] on the print server.
  3. When the interlock switch is set to EN, make sure the print server is automatically turned on and the power switch lights up.
  4. Press the [Home] key on the operation panel of the printer, and wait about five minutes until the [TotalFlow] icon appears on the Home screen.

If the [TotalFlow] icon does not appear, startup may have failed. Check the digital display [A] at the rear side of the print server and refer to "LED Error Codes".