• The DADF unit and scanner unit are connected by an FFC [A], so they cannot be separated.
  • Replace the DADF unit and scanner unit together as the DADF/Scanner Assembly.

 

  1. Rear Cover (Rear Cover)
  2. Controller box cover (Controller Board)
  3. Disconnect the three FFCs, and then remove the ferrite core [A].
  4. Remove the left stand cover [A] and right stand cover [B]. (hook × 1 each)

  5. Disconnect the three harnesses and ground wire from the left stand.

    • When disconnecting the ground wire, use a tool such as radio pliers to hold it.

  6. Open the top cover and remove the stepped screw [E].

    • The stepped screw is a plastic screw with an anchor.
    • Pull it out by grasping the anchor with pliers, etc after loosening it halfway.

  7. Close the top cover.
  8. Slide the scanner unit [F] in the direction of the blue arrow and pull it out while pushing the lock button [G].