• If there are printer jobs in the machine, print out all jobs in the printer buffer.
  • Turn off the main power switch and unplug the machine before you do the procedures in this section.

Use extreme caution when removing and replacing components. The cables in the machine are located very close to moving parts; proper routing is a must.

After components have been removed, any cables that have been displaced during the procedure must be restored as close as possible to their original positions. Before removing any component from the machine, note any cable routings that may be affected.

Before servicing the machine:

  1. Verify that documents are not stored in memory.
  2. Remove the print cartridge before you remove parts.
  3. Unplug the power cord.
  4. Work on a flat and clean surface.
  5. Replace with authorized components only.
  6. Do not force plastic material components.

Make sure all components are returned to their original positions.