SP Menu (only for MF Models)

Information Display

Model Name

Displays the Model Name, Depends on Engine Firmware Settings

FW Version

CTL FW Version

Displays the Firmware Version

FAX FW Version

Displays the Facsimile Firmware Version.

Engine FW Version

Displays the Engine Firmware Version

Printer Counter

Displays the number of sheets printed in color.

B&W Print Detail

Economy Print

Scanner Counter

Total Page

Jam Counter

Jam Total

Displays the number of paper jams in Tray 1.

Coverage

Coverage1 (Tray 1)

Displays the print coverage on the sheets fed from Tray 1.

Engine Service Setting

Sets the Plug and Play name.

SP C260SFNw: 0x10

SP C262SFNw: 0x14

C262SFNw: 0x14

[0x00 to 0x7F / - / -]

Sets the destination and updates the engine setting.

DOM/ NA (Default)/ EU/ CHN/ TAIWAN/ ASIA / LA

DFU (Designed for Factory Use)

Do not change this setting. Displays the current model.

DFU (Designed for Factory Use)

Do not change this setting.

[0x00 to 0x7F / - / -]

Displays the current brand ID number.

DFU (Designed for Factory Use)

Do not change this setting.

[0x00 to 0x7F / - / -]

Displays the current maintenance ID number.

Sets the Media type.

Plain paper (Default), Thick Paper 2, Middle Thick Paper, Thick Paper 1, Recycled Paper, Color Paper, Letterhead, Preprinted Paper, Prepunched Paper, Label Paper, Bond Paper, Cardstock, Envelope, Thick Post, Thin Paper

Adjusts the transfer roller current, based on the default value.

[-15 to 15 / 0 (Default) / 1A/step]

Adjusts the transfer roller current, based on the default value.

[-15 to 15 / 0 (Default) / 1A/step]

Adjusts the temperature of the fusing unit, based on the default value.

[-30 to 0 / 0 (Default) / 2°C/step]

Toner Limit

Text

Determines the maximum amount of ink/toner you can use in any area of your text. This is where you are controlling exactly how much ink will be used during printing.

[200 to 400 / 250 (Default)/ 10/step]

Graphic

Determines the maximum amount of ink/toner you can use in any area of your graphic. This is where you are controlling exactly how much ink will be used during printing.

[200 to 400 / 250 (Default)/ 10/step]

Image

Determines the maximum amount of ink/toner you can use in any area of your image. This is where you are controlling exactly how much ink will be used during printing.

[200 to 400 / 250 (Default)/ 10/step]

Registration

Horiz. Tray1

Adjusts the horizontal registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change.

[-15 to 15 / 0 (Default) / 1 mm/step]

Vert.Tray1

Adjusts the vertical registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change.

[-15 to 15 / 0 (Default) / 1 mm/step]

Horiz.Tray2

Adjusts the horizontal registration for tray 2. If the machine settings are reset to the factory defaults, this value does not change.

[-15 to 15 / 0 (Default) / 1 mm/step]

Vert.Tray2

Adjusts the vertical registration for tray 2. If the machine settings are reset to the factory defaults, this value does not change.

[-15 to 15 / 0 (Default) / 1 mm/step]

Horiz Bypass Tray

Adjusts the horizontal registration for the bypass tray. If the machine settings are reset to the factory defaults, this value does not change.

[-15 to 15 / 0 (Default) / 1 mm/step]

Vert Bypass Tray

Adjusts the vertical registration for the bypass tray. If the machine settings are reset to the factory defaults, this value does not change.

[-15 to 15 / 0 (Default) / 1 mm/step]

Horiz.Dup. Back

Adjusts the horizontal registration for the back side in duplex mode. If the machine settings are reset to the factory defaults, this value does not change.

[-15 to 15 / 0 (Default) / 1 mm/step]

Vert.Dup. Back

Adjusts the vertical registration for the back side in duplex mode. If the machine settings are reset to the factory defaults, this value does not change.

[-15 to 15 / 0 (Default) / 1 mm/step]

LSU Adjustment

Character: alphanumeric "0-9", "a-f", "A-F", only valid data can be input.

Input length: 160 bytes

Init. LSU data

The engine will do color registration and density tuning automatically.

The printer will warm up automatically after this setting is changed.

Fuser SC Detect

On/Off

If On, the engine detects SC559. If Off, the engine does not detect "Fusing SC Reset".

Fuser SC Reset

Resets the Fusing related SC.

Init Engine EEPROM

Execute this to initialize a new EEPROM. Turn the machine power off/on after you execute this setting.

Also, the following items are cleared by the EEPROM initialization:

• Machine total counter (total page, full color, and B&W)
• Error log (listed as “Call Service” on Maintenance Page)
• Duplex page counter

Special Mode

DFU (Designed for Factory Use)

Do not change this setting.

PM Parts Rep Notice

Sets whether to display the PM parts replacement notice and whether to stop the engine.

0

At near end: No Notice / Not Stopped

At life end: Notice “Replace Now” / Not Stopped

1

At near end: No Notice / Not Stopped

At life end: No Notice / Not Stopped

2 (default)

At near end: Notice / Not Stopped

At life end: Notice “Replace Now” / Not Stopped

3

At near end: Notice “Replace Soon” / Not Stopped

At life end: Notice “Replace Now” / Stopped

Specifies whether to have the machine switch to Energy Saver Mode 3 instead of Energy Saver Mode 2 when the machine has been idle for 10 minutes.

Scanner Service Setting

Mono Compression

Sets the monochrome compression type for scanning.

MH (Default)/ MR/ MMR

Registration Adjust

ADF Main Reg.

Adjusts the ADF main-scan registration.

[-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step]

ADF Sub Reg.

Adjusts the ADF sub-scan registration.

[-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step]

Flatbed Main Reg.

Adjusts the Flatbed main-scan registration.

[-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step]

Flatbed Sub Reg.

Adjusts the Flatbed sub-scan registration.

[-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step]

Adjusts the DADF main-scan registration on the back.

[-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step]

Adjusts the DADF sub-scan registration on the back.

[-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step]

Size Adjust

ADF/DADF Sub Reg.

Adjusts the ADF/DADF sub-scan magnification.

[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]

Flatbed Sub Reg.

Adjusts the Flatbed sub-scan magnification.

[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]

Backside CIS-Red-White

Adjusts the DADF difference between front and back for red.

[-15 to 15 / 0 (Default)/ 1 /step]

Adjusts the DADF difference between front and back for green.

[-15 to 15 / 0 (Default)/ 1 /step]

Adjusts the DADF difference between front and back for blue.

[-15 to 15 / 0 (Default)/ 1 /step]

Backside CIS-Gray-White

Adjusts the DADF difference between front and back for gray.

[-15 to 15 / 0 (Default)/ 1 /step]

Adjusts the leading-edge margin for flatbed scanning.

[-3.0 to 3.0 / 0 (Default)/ 0.1 mm/step]

Adjusts the trailing-edge margin for flatbed scanning.

[-3.0 to 3.0 / 0 (Default)/ 0.1 mm/step]

Adjusts the left margin for flatbed scanning.

[-3.0 to 3.0 / 0 (Default)/ 0.1 mm/step]

Adjusts the right margin for flatbed scanning.

[-3.0 to 3.0 / 0 (Default)/ 0.1 mm/step]

Adjusts the leading-edge margin for ADF/DADF scanning.

[-3.0 to 3.0 / 0 (Default)/ 0.1 mm/step]

Adjusts the trailing-edge margin for ADF/DADF scanning.

[-3.0 to 3.0 / 0 (Default)/ 0.1 mm/step]

Adjusts the left margin for ADF/DADF scanning.

[-3.0 to 3.0 / 0 (Default)/ 0.1 mm/step]

Adjusts the right margin for ADF/DADF scanning.

[-3.0 to 3.0 / 0 (Default)/ 0.1 mm/step]

Fax Service Setting

Modem Settings

RX Level

Sets the reception level.

[-43 dBm (Default)/ -33 dBm/ -26 dBm

/ -16 dBm]

TX Level

Sets the transmission level.

[0 dBm/ -1 dBm/ -2 dBm/ -3 dBm/ -4 dBm

/ -5 dBm/ -6 dBm/ -7 dBm/ -8 dBm/ -9 dBm

/ -10 dBm/ -11 dBm/ -12 dBm/ -13 dBm

/ -14 dBm/ -15 dBm]

Cable Equalizer

These selectors are used to improve the pass-band characteristics of analogue signals on the telephone line.

[0Km (Default)/ 1.8Km/ 3.6Km/ 7.2Km]

Protocol Definition

Training Retries

This sets the number of training retries to be repeated before automatic fallback.

[1 Time/ 2 Times (Default)/ 3 Times/ 4 Times]

Encoding

Sets the compression method for Tx/Rx.

[MMR+MR+MH (Default)/ MR+MH/ MH]

Protocol Definition Timer

T0 Timer

Timeout for response from the called station in automatic sending mode

[35 Sec/ 45 Sec/ 55 Sec/ 60 Sec(Default)/ 90 Sec/ 140 Sec]

T1 Timer

Set the time length for the T1 timer.

[40 Sec (Default)/ 50 Sec]

T4 Timer

Set the time length for the T4 timer.

[3 Sec (Default/ 4.5 Sec]

RX Settings

Silence Detection

Silence (No tone) detection time (Rx mode : FAX/ TAD Only)

After the line is connected via the external telephone, the machine can detect silence (no tone) for the time length specified by this setting.

[30 sec (Default)]

CNG Tone Detection Time

CNG tone detection time ( RX mode : FAX / TEL, FAX / TAD Only)

After the line is connected via the external telephone, the machine can detect a CNG signal for the time length specified by this setting.

[5 Sec (Default)/ 10 Sec]

CNG Cycles

Number of CNG cycles to be detected

This setting is only effective for FAX/TAD mode.

[1.5 Cycle (Default)/ 2.0 Cycle]

Tone Sound Monitoring

Determines the period when tones from the line are monitored.

[No Monitoring/ Up To Phase B (Default)/ All TX Phases]

RX Settings

Stop/Clear key

Pressing the Stop/Clear key can stop the current receiving operation. Received data is lost.

[No Functional (Default)/ Functional]

Off-Hook Level

DFU (Designed for Factory Use)

Do not change this setting.

[10V (Default)/ 15V/ 20V/ 25V]

Off-Hook Detection Period

Sets the Off-Hook detection period.

200 ms (default)

800 ms

Number for Remote Switch

-

[0 to 9 / - / 1step]

Number of time to press

-

[1 to 3 / - / 1step]

Period for TEL to FAX

-

[Limitless / 10 sec / 20 sec / 30 sec/ 40 sec]

TX Settings

Redial Interval

Sets the redial interval when Tx fails.

[5 Min/ 6 Min]

Redialings

Sets the number of redials when Tx fails.

[2 times/ 3 Times/ 4 Times/ 5 Times]

Overseas Comm Mode Settings

Overseas Comm Mode

This sets the machine to ignore a DIS signal sent from the called station once in a sending operation.

[Off (Default)/ Ignore DIS Once]

Minimum Time Length

If this setting is set to "On", the machine detects the CNG signal after the line is connected. If it is set to "Off", the machine detects the CNG signal as long as the line is connected.

[100 Ms/ 200 Ms/ 300 Ms/ 400 Ms (Default)]

Dial Pulse Setting

Dial Pulse Type

This sets the number of pulses that are generated during dialing.

• N: Dialing '0' generates 10 pulses --- Dialing '9' generates 9 pulses.
• N+1: Dialing '0' generates 1 pulses --- Dialing '9' generates 10 pulses.
• 10-N: Dialing '0' generates 10 pulses --- Dialing '9' generates 1 pulse.

Tone Signal Settings

Tone Signal Transmission Time Length

Sets the tone signal transmission time length

[100 ms (Default)]

Minimum Pause in Tone Dialing

Sets the minimum pause during tone dialing

[100 ms (Default)/ 150 ms/ 200 ms]

Attenuator For Pseudo RingBack tone To the Line

Sets the attenuator for pseudo ringback tone to the line

[0 to 15 / 10 (Default)/ 1 dB/step]

DTMF Level

Sets the transmission level of DTMF tones.

[-12 dBu / -11 dBu/ -10 dBu/ -8 dBu/ -6 dBu]

DTMF Delta

Sets the level difference between high band frequency signals and low band frequency signals when sending DTMF tones.

[2 dBu/ 3 dBu]

1Dial Tone Detection

Wait Time

The machine starts dialing after the specified interval without detection of a dial tone when

Dial tone detection is set to "No detection".

[3.5 Sec (Default)/ 7.0 Sec/ 10.5 Sec

/ 14.0 Sec]

Timeout Length

This setting sets the time-out length for the 1st dial tone detection. The machine waits for a dial tone for the specified time and disconnects itself from the line when no dial tone is input.

[10 Sec (Default)/ 15 Sec/ 20 Sec/ 30 Sec]

BT (Busy Tone) Detection

BT Setting

DFU (Designed for Factory Use)

Do not change this setting.

[Off/ On]

BT: Busy tone

BT Frequency

DFU (Designed for Factory Use)

Do not change this setting.

[300-550 Hz/ 300-650 Hz/ 325-525 Hz/ 340-550 Hz/ 350-500 Hz/ 350-550 Hz/ 375-475 Hz/ 380-520 Hz]

BT Level

DFU (Designed for Factory Use)

Do not change this setting.

[-35 dB/ -36 dB/ -37 dB/ -38 dB/ -39 dB]

BT Cadence

DFU (Designed for Factory Use)

Do not change this setting.

[0.10/ 0.15/ 0.20/ 0.25/ 0.30/ 0.35/ 0.40/ 0.45/ 0.50/ 0.75]

Comm Settings

RTN Rate

The machine checks the actual data reconstruction errors and then transmits an RTN depending on the decoding error rate that is set by this setting (Number of lines containing an error per page / Total number of lines per page).

[10%/ 15%]

V34 Modem

DFU (Designed for Factory Use)

Do not change this setting.

[Permitted (Default)/ Prohibited]

V17 Modem

DFU (Designed for Factory Use)

Do not change this setting.

[Permitted (Default)/ Prohibited]

V34 Settings

Equalizer

These selectors set the equalizer's training level to be applied if training fails due to poor line connection.

[Automatic (Default)/ 4 Point/ 16 Point]

Redialing

Resend when a communication error occurs.

[Disabled (Default)/ Not Disabled]

First TX Speed

Sets the first transmission speed choice, before fallback.

[2400 Bps/ 4800 Bps/ 7200 Bps/ 9600 Bps

/ 12000 Bps/ 14400 Bps/ 16800 Bps/ 19200 Bps/ 21600 Bps/ 24000 Bps/ 26400 Bps/ 28800 Bps/ 31200 Bps/ 33600 Bps (Default)]

Symbol Rate

This setting limits the transmission speed range in V.34 mode by masking the desired symbol rate(s).

[Not Used (Default)/ 3429 Sym/Sec

/ 3200 Sym/Sec/ 3000 Sym/Sec

/ 2800 Sym/Sec/ 2400 Sym/Sec]

Internet Fax Function

(only for SP C262SFNw)

Disable/Enable

Decides whether the Internet Fax function is used or not.

Default: Enabled

Reply-To Setting

Sets “Reply-To” in the SMTP authentication.

Yes: Sets the e-mail address that is usually set in the “From” field in the “Reply-To” field, and sets the “Administrator e-mail Address” in the “From” field.

No: Not set.

Default: No

Prt Rec Txt Mail Header

Selects whether or not to print the header part of E-mail.

Default: No

All Document Transfer

If the machine cannot print faxes due to a printer malfunction or for any other reason, transfer the data to another fax machine for printing.

This feature is for both TX/RX jobs of fax and Internet Fax, and excludes reports. Below is a list of target data that should be transferred:

1. Fax RX image data (receive/forward)
2. Fax TX image data (redial)
3. Internet Fax RX image data (receive/forward)
4. Internet Fax TX image data (redial)
5. PC fax jobs (redial)

Max. 40 characters (one byte)

G3 protocol dump of the latest communication is printed.

(M203 doesn't support this)

Off (Default)/ Error/ On

(6) CTL SP

Ecomomy Color Print

DFU (Designed for Factory Use)

Do not change this setting.

Specifies whether to enable or disable the AirPrint function.

[Disable(Default) /  Enable]

Specifies whether to send the debug log via the Ethernet port or USB port or to disable the Debug Tool function.

[OFF(Default) / NIC / USB]