Error Type | Error Description | Error Code |
|---|---|---|
General | Normal (No Error) | 0 |
STOP | xxxx01 | |
Unknown Error | xxxxFF | |
RX T1 Time Out | Not logged in activity report | |
Local Mechanical error | Scanner Error during TX | 1xxx11 |
Memory Full during RX | 2xxx14 | |
Authorized Reception = Enable, Since received TSI was not match, reception was refused. | xxxx06 | |
Dial failure | Connection Fail | xxxx21 |
Dial Fail | xxxx22 | |
Redial All Failed | xxxx23 | |
Comm. Error | TX T1 Time Out | xxxx31 |
V8 negotiation Fail | xxxx32 | |
Retry Out | xxxx40 | |
Too many FTT | xxxx41 | |
Too many CRP | xxxx42 | |
T2 Time Out | xxxx43 | |
DCN received | xxxx44 | |
Command Rec Error | xxxx45 | |
Resp Rec Error | xxxx46 | |
Invalid Command/Response RX | xxxx47 | |
Remoter No RX capability | xxxx48 | |
T1 time out after EOM | xxxx49 | |
T2 Time Out | xxxx50 | |
Image Data not ready | xxxx51 | |
Phase-C Time Out | xxxx52 | |
JBIG Buffer Full | xxxx53 | |
Retry Out | xxxx60 | |
T2 Time Out | xxxx61 | |
DCN received | xxxx62 | |
Too many CRP | xxxx63 | |
Too many PPR | xxxx64 | |
RNR time Out | xxxx65 | |
RTN/PIN Received, EOR/ERR/DCN | xxxx66 | |
Invalid Command/Response RX | xxxx67 | |
Comm. Error | Command Rec Error | xxxx68 |
Resp Rec Error | xxxx69 | |
Time Out | xxxx70 | |
Modem hang-up | xxxx80 | |
V34 abort received | xxxx81 | |
V34 t1 timeout, control channel error | xxxx82 | |
V34 t1 timeout, primary channel error | xxxx83 | |
Data not sent until guard timer expired | xxxx84 |