- For information on how to enter the Service Mode, contact the supervisor in your branch office.
Service Menu | ||
Toner Limit | Toner Limit Tex | Determines the maximum amount of ink/toner you can use in any area of your text. This is where you are controlling exactly how much ink will be used during printing. [200 to 400 / 250 (Default)/ 10/step] Setting 0: Off |
Toner Limit Gra | Determines the maximum amount of ink/toner you can use in any area of your graphic. This is where you are controlling exactly how much ink will be used during printing. [200 to 400 / 250 (Default)/ 10/step] Setting 0: Off | |
Toner Limit Ima | Determines the maximum amount of ink/toner you can use in any area of your image. This is where you are controlling exactly how much ink will be used during printing. [200 to 400 / 250 (Default)/ 10/step] Setting 0: Off | |
Engine Maintenance | ||
Model | Displays only Displays the current model in a dropdown list. Do not change this setting (Designed for Factory Use). | |
Brand | Displays the current brand ID number. Do not change this setting (Designed for Factory Use). [0x00 to 0x7F / - / -] | |
| Destination | Sets the destination and updates the engine setting. DOM/ NA (Default)/ EU/ CHN/ TAIWAN/ ASIA / LA | |
PNP Name | Sets the Plug and Play name. SP C260DNw:0x10 SP C262DNw: 0x14 C262DNw: 0x14 [0x00 to 0x7F / - / -] | |
2nd Transfer | Media Type | Sets the Media type. Plain paper, Thin Paper, Thick Paper 2, Thick Paper 1, Envelope, Cardstock, Bond Paper, Label Paper, Prepunched, Preprinted, Letterhead, Color Paper, Recycled Paper, Middle Thick |
2nd Front | Adjusts the transfer roller current, based on the default value. [-15 to 15 / 0 (Default) / 1 | |
2nd Back | Adjusts the transfer roller current, based on the default value. [-15 to 15 / 0 (Default) / 1 | |
Fuser Temp. | Adjusts the temperature of the fusing unit, based on the default value. [-30 to 0 / 0 (Default) / 2°C/step] | |
Registration
| Horiz. Tray1 | Adjusts the horizontal registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |
Vert.Tray1 | Adjusts the vertical registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] | |
Horiz Bypass Tray | Adjusts the horizontal registration for the bypass tray. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] | |
Vert Bypass Tray | Adjusts the vertical registration for the bypass tray. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] | |
Horiz.Dup Back | Adjusts the horizontal registration for the back side in duplex mode. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] | |
Vert.Dup Back | Adjusts the vertical registration for the back side in duplex mode. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] | |
| Init. Eng. ROM | Execute this to initialize a new EEPROM. Turn the machine power off/on after you execute this setting. Also, the following items are cleared by EEPROM initialization:
| |
Clear log | Clears the failure analysis log. After the failure is cleared, this clears the unnecessary log to record the next log. | |
Reset Transfer | Resets the transfer unit life counter. | |
Reset Fuser | Resets the fusing unit life counter. | |
Reset 2nd | Resets the 2nd transfer unit (transfer roller) life counter. | |
Maintenance ID | Displays the current maintenance ID number. Do not change this setting (Designed for Factory Use). [0x00 to 0x7F / - / -] | |
LSU Adjustment | Input 160 bytes setting. | Character: alphanumeric "0-9", "a-f", "A-F", only valid data can be input. Input length: 160 bytes |
| Init. LSU data | Appropriate LD parameters to match the replaced laser optics housing unit are written to the EEPROM of the engine board. | |
Trans. Belt Adj | When you execute "Trans. Belt Adj", the transfer belt adjustment is done. This calibrates the motor speed to match the length of the new transfer belt. | |
Fuser SC Detect | On/Off* | If On, the engine detects SC559. If Off, the engine does not detect "Fusing SC Reset". |
Fuser SC Reset | Resets the Fusing related SC. | |
Color Regist | The engine will do color registration and density tuning automatically. The printer will warm up automatically after this setting is changed. | |
Special Mode | DFU (Designed for Factory Use) Do not change this setting. | |
PM Parts Notice | Sets whether to display the PM parts replacement notice and whether to stop the engine. | |
0 | At near end: No Notice / Not Stopped | |
At life end: Notice “Replace Now” / Not Stopped | ||
1 | At near end: No Notice / Not Stopped | |
At life end: No Notice / Not Stopped | ||
2 (default) | At near end: Notice / Not Stopped | |
At life end: Notice “Replace Now” / Not Stopped | ||
3 | At near end: Notice “Replace Soon” / Not Stopped | |
At life end: Notice “Replace Now” / Stopped | ||
Economy Color | |
Conversion Mode | Sets the conversion mode for the economy color print. No: No conversion is executed. Color Up Mode: Converts into economy color. The image density is decreased. B&W Up Mode: Converts into Economy Black and white. |
System Maint. | |
| AirPrint | Specifies whether to enable or disable the AirPrint function. [Disable(Default) / Enable] |
| Debug Tool | Specifies whether to send the debug log via the Ethernet port or USB port or to disable the Debug Tool function. [OFF(Default) / NIC / USB] |