Part | By | At | Action | Comments | |
|---|---|---|---|---|---|
Fusing Unit*1 | |||||
Fusing Belt | S | 1100K (935 Km) | |||
Hot Roller | S | 1800K (1530 Km) | |||
Pressure Roller | S | 1100K (935 Km) | |||
Pressure Roller Bearings | S | 1100K (935 Km) | |||
Hot Roller Separation Plate | S | 600K | Dry cloth | ||
Pressure Roller Pick-off Pawls | S | 600K | |||
Fusing Unit Entrance Guide | S | 600K | |||
Heating Roller Thermistor | S | 1100K | Dry cloth, always clean at PM | ||
Pressure Roller Thermistor | S | 1100K | |||
Main Gears*2 | S | 1100K | |||
Hot Roller Bearings | S | 1100K | |||
Heating Roller Bearings | S | 1100K | |||
Heating Roller Bushings | S | 1100K | Always inspect at PM | ||
Web Cleaning Unit*1 | --- | ||||
Cleaning Web | S | 750 K (271 Km) | |||
Web Tension Roller | S | 3190K (2712 Km) | |||
Fusing Thermopiles | S | 600K | Alcohol damp cloth to remove toner and paper dust | ||
*1 TCRU operator can replace entire unit.
*2 Use Fluotribo MG grease, with about 4±0.8 g on the pressure roller drive gear and 1.5±0.3 g on the idle reduction gear.