The yield figures in the above table are based on the following conditions:
- A4 (LT) long-edge feed
- 5% image coverage ratio
- Color ratio: 30% (IM C6000/C5500/C4500/C3500/C3000), 20% (IM C2500/C2000)
- 3 prints/job (IM C3500/C3000), 4 prints/job (IM C6000/C5500/C4500), 2 prints/job (IM C2500/C2000)
- Environment: Normal temperature and humidity
Yield may change depending on circumstances and print conditions.
Symbol keys:
C: Clean, R: Replace, L: Lubricant, I: Inspect
Booklet Finisher SR3270 / Finisher SR3260
| Item | Cycle | EM parts | Note |
|---|---|---|---|
| Stapler | R | Replace when the staple counter in the logging data reached 5000k. |
Punch Unit PU3080
| Item | Cycle | EM parts | Note |
|---|---|---|---|
| Punch Unit | R 1000k | Replace when the punch unit in the logging data reached 1000k. |
Booklet Finisher SR3290 / Finisher SR3280
Rollers (Drive/Driven) | C 500K | Wipe with a cloth dampened with ethyl alcohol. | |
| Discharge Brush | C 500K | Wipe with a cloth dampened with ethyl alcohol. | |
| Bearings | C 500K | Lubricate with silicone oils when noise occurred. | |
| Sensors | C 500K | Clean with a blower brush. | |
| Corner Stapler | R 3000K | Replace when the corner stapling counter in the logging data reached 3000k. | |
| Booklet Stapler | R 1000K | Replace when the booklet stapling counter on logging data reached 1000K. | |
Item | Cycle | EM parts | Notes |
|---|
Punch Unit PU3090
| Item | Cycle | EM parts | Note |
|---|---|---|---|
| Punch Unit | R 3000k |
ARDF DF3110/SPDF3120
| Item | Cycle | EM parts | Note |
|---|---|---|---|
Pick-up Roller | C | Wipe with a cloth dampened with ethyl alcohol. | |
Feed Belt | C 120K | Wipe with a cloth dampened with ethyl alcohol. | |
Separation Roller | C 120K | Wipe with a cloth dampened with ethyl alcohol. |
Internal Finisher SR3250
Stapler | R 200K | Replace when staple counter on logging data reached 200K. | |
Item | Cycle | EM parts | Notes |
|---|
Internal Finisher SR3300
Stapler | R 100K | Replace when staple counter on logging data reached 100 thousand times. | |
Item | Cycle | EM parts | Notes |
|---|
Yield Parts
- Some of the parts mentioned in these tables have a target yield. However, the total copy/print volume made by the machine will not reach the target yield within the machine's targeted lifetime if the machine is used under the target usage conditions (ACV, color ratio, P/J, and C/O). So, these parts are categorized not as PM parts but as yield parts (EM parts).