SP1-XXX (Service Mode)

1001	[Bit Switch]		Values
1-001-001	Bit Switch 1		0	1
	bit　0	DFU	-	-
	bit 1	sysName Value	Model name (PnP name)	Hostname
		This BitSw can switch the value of the sysName of the standard MIB.
	bit 2	DFU	-	-
	bit 3	I/O Timeout	Enabled	Disabled
		Enables/Disables MFP I/O Timeouts. If disabled, the MFP I/O Timeout setting will not be in effect. I/O Timeouts will never occur.
	bit 4	SD Card Save Mode	Disabled	Enabled
		This BitSw enables the SD card save mode setting menu to be displayed. After enabling this BitSw, the Card Save settings will appear under: "User Tools > Machine Features >Printer Features > List/Test print"
	bit 5	Paper Size Error Margin	±5pt	±10pt
		When a PS job is printed on a custom paper size, the job might not print because of a paper size mismatch caused by a calculation error. This BitSw can set the allowable margin of error value. Note:This is available for PS, PDF only.
	bit 6	Color Balance Switching 1	Standard Color Balance	FX compatibility
		This BitSw can be used to restore the color balance to match that of Fuji-Xerox devices. Note: If both BitSw #2-0, BitSw #2-4 and BitSw #1-6 are configured to "1", the configuration of #2-0 will be given priority and the color balance of 09S and earlier models will be used.
	bit 7	Printable Area Frame Border	Disabled	Enabled
		Prints all RPCS and PCL jobs with a border around the printable area. Note:This is available for PCL, RPCS only.

1001	[Bit Switch]		Values
1-001-002	Bit Switch 2		0	1
	bit 0	Color Balance Switching 2	Standard Color Balance	Color balance of 09S and earlier models.
		This BitSw can be used to restore the color balance to match 09S and earlier model deveices. Note: If both BitSw #2-0 and BitSw #2-4 are configured to "1", the configuration of #2-0 will be given priority and the color balance of 09S and earlier models will be used.
	bit 1	DFU	-	-
	bit 2	Collation Type	Shift Collate	Normal Collate
		The type of collation will be applied to a job when the job does not explicitly define a collation type. Note: If #5-0 is enabled, this BitSw has no effect.
	bit 3	PDL Auto Switching	Enabled	Disabled
		Enables/Disables the MFPs ability to switch the PDL processor when receiving a job which contains both PS andPCL5e/c.
	bit 4	Color Balance Switching 3	Standard Color Balance	Color balance of 09A and extended 09A models.
		This BitSw can be used to restore the color balance to match 09A and extended 09A model devices. Note: If both BitSw #2-0 and BitSw #2-4 are configured to "1", the configuration of #2-0 will be given priority and the color balance of 09S and earlier models will be used.
	bit 5	DFU	-	-
	bit 6	DFU	-	-
	bit 7	DFU	-	-

1001	[Bit Switch]		Values
1-001-003	Bit Switch 3		0	1
	bit 0	DFU	-	-
	bit 1	DFU	-	-
	bit 2	Legacy HP Compatibility	Disabled	Enabled
	bit 2	Uses the same left margin as older HP models such as HP4000/HP8000. This setting enables the starting position of the graphics in the job to be changed. If this BitSw is enabled, the left margin command of "<ESC>r0A" will be conducted as "<ESC>r1A". PCL command are bellow: - <Esc> r0A ->Start Graphics at X coordinate of Zero - <Esc> r1A ->Start Graphics at Current Cursor This is available for PCL5e/c only.	Disabled	Enabled
	bit 3	DFU	-	-
	bit 4	DFU	-	-
	bit 5	DFU	-	-
	bit 6	DFU	-	-
	bit 7	DFU	-	-

1001	[Bit Switch]		Values
1-001-004	Bit Switch 4		0	1
	bit 0	DFU	-	-
	bit 1	DFU	-	-
	bit 2	DFU	-	-
	bit 3	Paper Path for IPDS Simplex Pages	Simplex paper path	Duplex paper path
	bit 3	This setting enables you to route the IPDS simplex job through the duplex unit. When this BitSw is set to duplex paper path, the simplex page might be printed on the reverse side.	Simplex paper path	Duplex paper path
	bit 4	DFU	-	-
	bit 5	DFU	-	-
	bit 6	DFU	-	-
	bit 7	DFU	-	-

1001	[Bit Switch]		Values
1-001-005	Bit Switch 5		0	1
	bit 0	Display Finishing Settings	Hide settings	Display settings
		If enabled, users will be able to configure the Collate Settings, Staple Settings, and Punch Settings from the operation panel. The available Settings will depend on the device and configured options. After enabling this BitSw, the settings will appear under: "User Tools > Machine Features >Printer Features > System"
	bit 1	Number of Copies with Paper Mismatch	Print Single Copy	Print All Copies
		If a paper size or type mismatch occurs while printing multiple copies, only a single copy is output by default. Using this BitSw, the device can be configured to print all copies even if a paper mismatch occurs.
	bit 2	GPS Filter	Enabled	Disabled
		If the GPS Filter is disabled, SDK applications will not be able to alter the print data standard printer applications receive. Note: The main purpose of this BitSw is for troubleshooting the effects of SDK applications on data.
	bit 3	PS Trigger for PDL Switching	Standard pattern	Pattern1
		Specifying the auto detection algorithm for PS while switching the print language. If the Pattern1 is selected, "%%" is used as a printer system PS trigger.
	bit 4	Increase Max. Number of Stored Jobs.	Disabled (100)	Enabled (XXX)
		Changes the maximum number of jobs that can be stored on the HDD. The default (disabled) is 100. If this is enabled, the max. will be raised to 750 or 1000 depending on the model.
	bit 5	DFU	-	-
	bit 6	Change Imposition Specification	Standard specification	Old model specification
		This setting enables the specification for imposition such as page alignment and image rotation to be changed to the specification of old models when job orientation and paper size are mixed. The old models are below: - PCL: 04A and earlier models - PS/PDF/RPCS: 05S and earlier models - BMLinkS: 05A and earlier models IRIPS PS/PDF： - 09A and earlier models: Operation under current model specification is not supported (Operation with older specification is recommended) - 15S and later models: Operation under current model specification is supported.
	bit 7	Paper Path for Letterhead Simplex Job	Simplex paper path	Duplex paper path
		This setting enables the simplex job to be routed through the duplex unit. Only affects jobs specified as letterhead.

1001	[Bit Switch]
1-001-006	Bit Switch 6		0	1
	bit 0	DFU	-	-
	bit 1	DFU	-	-
	bit 2	DFU	-	-
	bit 3	DFU	-	-
	bit 4	DFU	-	-
	bit 5	DFU	-	-
	bit 6	DFU	-	-
	bit 7	DFU	-	-

1001	[Bit Switch]
1-001-007	Bit Switch 7		0	1
	bit 0	DFU	-	-
	bit 1	DFU	-	-
	bit 2	DFU	-	-
	bit 3	DFU	-	-
	bit 4	DFU	-	-
	bit 5	DFU	-	-
	bit 6	DFU	-	-
	bit 7	DFU	-	-

1001	[Bit Switch]
1-001-008	Bit Switch 8		0	1
	bit 0	DFU	-	-
	bit 1	DFU	-	-
	bit 2	DFU	-	-
	bit 3	BW Printing without the PJL Color Command "DATAMODE"	Disabled	Enabled
	bit 3	This setting enables a job to be printed in BW without the PJL color command "DATAMODE". Note: Color jobs will not be printed without the PJL color command "DATAMODE". Note:This is available for PCL, PS only.	Disabled	Enabled
	bit 4	DFU	-	-
	bit 5	DFU	-	-
	bit 6	PJL/PDL Color Command Priority	PJL Priority	PDL Priority
	bit 6	This setting enables the priority of a PDL color command to be changed when a PJL color command is "@PJL RENDERMODE = GRAYSCALE" in a job. Note:This is available for PCL,RPCS,PS.	PJL Priority	PDL Priority
	bit 7	DFU	-	-

1001	[Bit Switch]
1-001-009	Bit Switch 9		0	1
	bit 0	PDL Auto Detection timeout of jobs submitted via USB or Parallel Port (IEEE 1284).	Disabled (Immediately)	Enabled (10 seconds)
		To be used if PDL auto-detection fails. A failure of PDL autodetection doesn't necessarily mean that the job can't be printed. This bit switch tells the device whether to time-out immediately (default) upon failure or to wait 10 seconds.
	bit 1	DFU	-	-
	bit 2	Job Cancel	Not cancelled	Cancelled
		This setting enables it to be specifed whether jobs will be cancelled after a jam occurs. Note: If this BitSw is enabled, printing under the following conditions might result in problems: - Job submission via USB or Parallel Port - Spool printing (WIM >Configuration > Device Settings > System) - Printing a large number of jobs continuously (The status of the job are not acquired when jobs exceeding the number guaranteed by the job monitor are continuously printed.)
	bit 3	DFU	-	-
	bit 4	Timing of the PJL Status ReadBack (JOB END) when printing multiple collated copies.	Mode 0	Mode 1
		This BitSw determines the timing of the PJL STATUS JOB END sent when multiple collated copies are being printed. Mode 0: JOB END is sent by the device to the client after the first copy has completed printing. This causes the page counter to be incremented after the first copy and then again at the end of the job. Mode 1: JOB END is sent by the device to the client after the last copy has finished printing. This causes the page counter to be incremented at the end of each job.
	bit 5	UTF-8 Mode	Enabled	Disabled
		Enabled (=0): Text composed of UTF-8 characters can be displayed in the operation panel. Disabled (=1): UTF-8 characters cannot be displayed in the operation panel. For example, job names are sometimes stored in the MIB using UTF-8 encoded characters. When these are displayed on the operation panel, they will be garbled unless this BitSw is enabled (=0).
	bit 6	Print Option Configuration (rsh, rcp, ftp)	Enabled	Disabled
		This BitSw enables the specification of the configuration of the print option using rcp/rsh/ftp.
	bit 7	Enable/Disable Print from USB/SD's Preview function	Enabled	Disabled
		Determines whether the Print from USB/SD function will have the Preview function. Enabled (=0): Print from USB/SD will have the Preview function. Disabled (=1): Print from USB/SD will not have the Preview function.

1001	[Bit Switch]
1-001-010	Bit Switch A		0	1
	bit 0	DFU	-	-
	bit 1	DFU	-	-
	bit 2	DFU	-	-
	bit 3	DFU	-	-
	bit 4	DFU	-	-
	bit 5	Store and Skip Error Job locks the queue	Queue is not locked after SSEJ	Queue locked after SSEJ
	bit 5	If this is 1, then after a job is stored using Store and Skip error Job (SSEJ), new jobs cannot be added to the queue until the stored job has been completely printed.	Queue is not locked after SSEJ	Queue locked after SSEJ
	bit 6	Allow use of Store and Skip error Job if connected to an external charge device.	Does not allow SSEJ with ECD	Allows SSEJ with ECD
	bit 6	If this is 0, Store and Skip error Job (SSEJ) will be automatically disabled if an external charge device is connected. Note: We do not officially support enabling this bitsw (1). Use it at your own risk.	Does not allow SSEJ with ECD	Allows SSEJ with ECD
	bit 7	Job cancels remaining pages when the paid-for pages have been printed on an external charge device	Job does not cancel	Job cancels
	bit 7	When setting 1 is enabled, after printing the paid-for pages on an external charge device, the job that includes any remaining pages will be canceled. This setting will prevent the next user from printing the unnecessary pages from the previous user's print job.	Job does not cancel	Job cancels

1001	[Bit Switch]
1-001-011	Bit Switch B		0	1
	bit 0	DFU	-	-
	bit 1	DFU	-	-
	bit 2	Limitless Paper Feeding for the Bypass Tray	Enabled	Disabled
		When the Bypass Tray is the target of the "Auto Tray Select", and "Machine Setting(s): Any Type" is configured for the "Tray Setting Priority" of the Bypass Tray, this BitSw can switch the behavior whether or not Limitless Paper Feeding is applied to the Bypass Tray. Enabled (=0: Default): Limitless Paper Feeding is applied to the Bypass Tray. If a tray other than the Bypass Tray matches the job's paper size and type but has run out of paper, printing will occur from the Bypass Tray. Disabled (=1): Limitless Paper Feeding is not applied to the Bypass Tray. If a tray other than the Bypass Tray matches the job's paper size and type but has run out of paper, printing will stop and an alert will appear on the LCD screen, stating that the tray has run out of paper. This prevents unexpected use of the Bypass Tray. Limitations when this BitSw is set to "1": - Jobs that contain more than one paper size cannot be printed. - The "Paper Tray Priority: Printer" setting must be configured to a tray other than the Bypass Tray.
	bit 3	Change the behavior of the center staple	Cancel the job	Continue to print
		This Bit Switch can change the behavior of the center staple when the maximum number of sheets for stapling is exceeded. 0 (default): The job is canceled and an error is recorded in the log. 1: The job is not canceled and is produced. How the job is produced in any behavior depends on the type of finisher.
	bit 4	"Apply Auto Paper Select" to Override Paper Size or Paper Type of the Device	Disabled	Enabled
		If this BitSw is enabled, the "Apply Auto Paper Select" setting will decide if the paper size or paper type that is specified in the device settings should be overridden by the job's commands when "Tray Setting Priority" is set to "Driver/Command" or　"Machine Setting(s): Any Type". - Apply Auto Paper Select = OFF: Overridden (priority is given to the job’s commands) - Apply Auto Paper Select = ON: NOT overridden (priority is given to the device settings)
	bit 5	DFU	-	-
	bit 6	Tray Selection when a Paper Mismatch Occurs.	Disabled	Enabled
		This BitSw enables the inactive auto paper select tray to be unselectable when a paper size/type mismatch occurs.
	bit 7	DFU	-	-

1001	[Bit Switch]
1-001-012	Bit Switch C		0	1
	bit 0	DFU	-	-
	bit 1	DFU	-	-
	bit 2	DFU	-	-
	bit 3	Switching paper discharge operation when the limit number of sheets stapled is exceeded	one by one	Upper limit number
		-
	bit 4	DFU	-	-
	bit 5	Change User ID type Displayed on Operation Panel	Login User Name	User ID
		If this BitSw is enabled, the user ID type on the operation panel can change to the user ID behavior exhibited in 14A and earlier models.
	bit 6	AiｒPrint	Enabled	Disabled
		-
	bit 7	AirPrint PDF	Enabled	Disabled
		-

1002	[Bit Switch2]
1-002-001	Bit Switch (2) 1 Settings		0	1
	bit 0	Paper size mismatch display	Enabled	Disabled
		Display warning screen (40909) of paper size mismatch.
	bit 1 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-002	Bit Switch (2) 2 Settings		0	1
	bit 0 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-003	Bit Switch (2) 3 Settings		0	1
	bit 0 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-004	Bit Switch (2) 4 Settings		0	1
	bit 0 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-005	Bit Switch (2) 5 Settings		0	1
	bit 0 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-006	Bit Switch (2) 6 Settings		0	1
	bit 0 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-007	Bit Switch (2) 7 Settings		0	1
	bit 0 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-008	Bit Switch (2) 8 Settings		0	1
	bit 0 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-009	Bit Switch (2) 9 Settings		0	1
	bit 0 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-010	Bit Switch (2) A Settings		0	1
	bit 0 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-011	Bit Switch (2) B Settings		0	1
	bit 0 to 7	DFU	-	-

1002	[Bit Switch2]
1-002-012	Bit Switch (2) C Settings		0	1
	bit 0 to 7	DFU	-	-

1003	[Clear Setting]
1-003-001	Initialize System	*CTL	[- / - / -] [Execute]
1-003-001	Initializes settings in the "System" menu of the user mode.
1-003-003	Delete Program	*CTL	[- / - / -] [Execute]

1004	[Print Summary]
1004	Prints the service summary sheet (a summary of all the controller settings).
1-004-001	Print Summary	*CTL	[- / - / -] [Execute]
1-004-002	Print Summary2	*CTL	[- / - / -] [Execute]

1005	[Display Version]
1-005-002	Printer Version	*CTL	[ - / - / - ]
	Displays the version of the controller firmware.

1006

[Sample / Proof Print]

1-006-001

Sample / Proof Print

*CTL

[0 or 1 / 1 / 1 /step]

0: Linked, 1: On

Enables and disables the document server. When you select "0," the document server is enabled or disabled in accordance with Copy Service Mode SP5-967. When you select "1," the document server is enabled regardless of Copy Service Mode SP5-967.

1101	[Data Recall]
1101	Recalls a set of gamma settings. This can be either a) the factory setting, b) the previous setting, or c) the current setting.
1-101-001	Factory	*CTL	[ - / - / - ] [Execute]
1-101-002	Previous	*CTL
1-101-003	Current	*CTL
1-101-004	ACC	*CTL

1102

[Resolution Setting]

Selects the printing mode (resolution) for the printer gamma adjustment.

1-102-001

Tone Control Mode Selection

CTL

[0 to 9 / 0 / 1/step]

0: 1200x1200 Photo (2bit/4col)

1: 1200x1200 Photo (1bit/4col)

2: 600x600 Photo (4bit/4col)

3: 600x600 Photo (2bit/4col)

4: 600x600 Photo (1bit/4col)

5: 1200x1200 Text (2bit/4col)

6: 1200x1200 Text (1bit/4col)

7: 600x600 Text (4bit/4col)

8: 600x600 Text (2bit/4col)

9: 600x600 Text (1bit/4col)

1103	[Test Page]
	Prints the test page to check the color balance before and after the gamma adjustment.
1-103-001	Color Gray Scale	CTL	[ - / - / - ] [Execute]
1-103-002	Color Pattern	CTL

1104	[Gamma Adjustment]
1104	Adjusts the printer gamma for the mode selected in the "Mode Selection" menu.
1-104-001	Black: Highlight	CTL	[0 to 30 / 00 / 1/step ]
1-104-002	Black: Shadow	CTL
1-104-003	Black: Middle	CTL
1-104-004	Black: IDmax	CTL
1-104-021	Cyan: Highlight	CTL
1-104-022	Cyan: Shadow	CTL
1-104-023	Cyan: Middle	CTL
1-104-024	Cyan: IDmax	CTL
1-104-041	Magenta: Highlight	CTL
1-104-042	Magenta: Shadow	CTL
1-104-043	Magenta: Middle	CTL
1-104-044	Magenta: IDmax	CTL
1-104-061	Yellow: Highlight	CTL
1-104-062	Yellow: Shadow	CTL
1-104-063	Yellow: Middle	CTL
1-104-064	Yellow: IDmax	CTL

1105

[Save Tone Control Value]

Stores the print gamma adjusted with the "Gamma Adj." menu item as the current setting. Before the machine stores the new "current setting", it moves the data currently stored as the "current setting" to the "previous setting" memory storage location.

1-105-001

Save Tone Control Value

*CTL

[ - / - / - ]

[Execute]

1106	[Toner Limit]
	Adjusts the maximum toner amount for image development.
1-106-001	Toner Limit Value	*CTL	[0 to 400 / 0 / 1 %/step ]

1110	[Media Print Device Setting]
	Selects the setting for the media print device.
1-110-002	0: Disable 1: Enable	*CTL	[0 or 1 / 1 / 1 / step]

1111

[All Job Delete Mode]

1-111-001

-

*CTL

[ 0 or 1 / 0 / 1 / step ]

0: Excluding New Job

1: Including New Job

Selects whether to include an image processing job in jobs subject to full cancellation from the SCS job list.

1113

[IBACC Exec]

Sets IBACC correction execution (calculation IBACC gamma) on / off.

0: Not calculate IBACC gamma. (Sets IBACC gamma linear)

1: Calculate IBACC gamma

1-113-001

0:Off 1:On

*CTL

[0 or 1 / 1 / 1/step]

1114	[IBACC ToneCtlSet]
1114	Sets back to the previous value of IBACC gamma correction for all resolutions. If there is no previous value, sets to the factory default values.
1-114-001	Tone (Prev.)	CTL	-
1-114-002	Tone (Factory)	CTL	-

1115	[IBACC Exec Time]
	Displays the time when IBACC is executed or sets back to the previous / initial value.
1-115-001	Time	CTL	-