5804

[OUTPUT Check]

5-804-001

Feed Pickup Solenoid 1

ENG

[OFF/ON]

Moves 1st paper feed tray pick up solenoid.

5-804-002

Feed Pickup Solenoid 2

ENG

[OFF/ON]

Moves 2nd paper feed tray pick up solenoid.

5-804-003

Bypass Pickup Solenoid

ENG

[OFF/ON]

Moves bypass pick up solenoid.

5-804-004

Exit Junction Solenoid

ENG

[OFF/ON]

Moves output paper divide solenoid.

5804

[OUTPUT Check]

Moves paper feed tray rising motor.

* Do not execute SP 5-804-006/008 without removing the paper tray. Otherwise, the tray might be damaged.

5-804-005

Tray 1 Lift Motor:CW

ENG

[OFF/ON]

5-804-006

Tray 1 Lift Motor:CCW

ENG

5-804-007

Tray 2 Lift Motor:CW

ENG

5-804-008

Tray 2 Lift Motor:CCW

ENG

5804

[OUTPUT Check]

Moves register motor.

5-804-009

Regist Motor:CCW:Standard Speed

ENG

[OFF/ON]

5-804-010

Regist Motor:CCW:Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-011

Regist Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-015

Regist Motor:Position Hold

ENG

[OFF/ON]

Holds position of register motor.

5804

[OUTPUT Check]

Moves paper feed motor.

* It is fed if there is paper in the paper tray.

5-804-016

Feed Motor:CW:Standard Speed

ENG

[OFF/ON]

5-804-017

Feed Motor:CW:Middle Speed

ENG

5-804-018

Feed Motor:CW:Low Speed

ENG

5-804-022

Feed Motor:CCW:Standard Speed

ENG

5-804-023

Feed Motor:CCW:Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-024

Feed Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

Moves vertical carry motor.

5-804-028

Bypass V-Transport Motor:CW:Std Speed

ENG

[OFF/ON]

5-804-029

Bypass V-Transport Motor:CW:Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-030

Bypass V-Transport Motor:CW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-034

Bypass V-Transport Motor:Position Hold

ENG

[OFF/ON]

Holds position of vertical carry motor.

5-804-037

Exit Motor: CW: Fusing Pressure Release

ENG

[OFF/ON]

Moves fusing dis-pressure.

* If driving this motor while attaching the fusing unit, be sure to stop it less than 5 seconds. Otherwise, the unit might be damaged.

5804

[OUTPUT Check]

Moves paper exit motor.

5-804-041

Exit Motor:CCW:Standard Speed

ENG

[OFF/ON]

5-804-042

Exit Motor:CCW:Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-043

Exit Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

Moves reverse motor.

5-804-047

Inverter Motor:CW:Standard Speed

ENG

[OFF/ON]

5-804-048

Inverter Motor:CW:Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-049

Inverter Motor:CW:Low Speed

ENG

5-804-052

Inverter Mt: CW: Normal Speed: Duplex

ENG

5-804-054

Inverter Mt: CW: Low Speed: Duplex

ENG

5-804-056

Inverter Motor:CCW:Standard Speed

ENG

5-804-057

Inverter Motor:CCW:Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-058

Inverter Motor:CCW:Low Speed

ENG

5-804-061

Inverter Mt: CCW: Normal Speed: Inc Speed

ENG

5804

[OUTPUT Check]

Moves duplex entrance motor.

5-804-065

Duplex Entrance Motor:CW:Standard Speed

ENG

[OFF/ON]

5-804-066

Duplex Entrance Motor:CW:Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-067

Duplex Entrance Motor:CW:Low Speed

ENG

5-804-068

Duplex Entrance Motor: Normal Speed: Duplex

ENG

5-804-069

Duplex Entrance Motor: Low Speed: Duplex

ENG

5804

[OUTPUT Check]

Moves duplex bypass motor.

5-804-071

Duplex Bypass Motor:CW:Standard Speed

ENG

[OFF/ON]

5-804-072

Duplex Bypass Motor:CW:Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-073

Duplex Bypass Motor:CW:Low Speed

ENG

5-804-074

Duplex Bypass Motor: CW: Normal Speed: Dup

ENG

5-804-075

Duplex Bypass Motor: CW: Low Speed: Duplex

ENG

5-804-077

Duplex Bypass Motor:CCW:Standard Speed

ENG

5-804-078

Duplex Bypass Motor:CCW:Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-079

Duplex Bypass Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-083

Duplex Bypass Motor:Position Hold

ENG

[OFF/ON]

Holds position of duplex bypass motor.

5804

[OUTPUT Check]

Moves fusing motor. *See Important below

5-804-092

Fusing Motor:CW:Standard Speed

ENG

[OFF/ON]

5-804-093

Fusing Motor:CW:Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-094

Fusing Motor:CW:Low Speed

ENG

5-804-098

Fusing Motor:CCW:Low Speed

ENG

Important: Use the procedure below to do the output checks for the fusing exit motor. If you do not follow this procedure, a kink will form in the fusing belt sleeve, and the fusing sleeve belt unit will need to be replaced.

1. Do one of the following:

  • Open the right cover of the paper bank
  • Remove one of the toner bottles
  • Pull out the waste toner bottle half-way
  • Remove the fusing unit

2. Enter SP mode.

3. Do the following out output checks:

  • SP5-804-092 (Fusing Motor:CW:Standard Speed)
  • SP5-804-093 (Fusing Motor:CW:Middle Speed)
  • SP5-804-094 (Fusing Motor:CW:Low Speed)
  • SP5-804-098 (Fusing Motor:CCW:Low Speed)

4. Without exiting SP mode, turn the main power switch off and then on again.

Important: If you exit SP mode before you turn the main power switch off, the fusing exit motor will stay off when the machine warms up. Heat will be concentrated in one area of the fusing belt sleeve and cause a kink to form. If this happens, you will need to replace the fusing sleeve belt unit.

5. Do the reverse of what you did in step 1 (for example, reattach the fusing unit).

5-804-102

PCB Box Cooling FanENG[OFF/ON]
Moves PCB box cooling fan.

5-804-103

PCB Box Cooling Fan: Half SpeedENG[OFF/ON]
Moves PCB box cooling fan.

5804

[OUTPUT Check]

5-804-104

Polygon Motor: L

ENG

[OFF/ON]

Runs motor with 21969 rpm.

5-804-105

Polygon Motor: M

ENG

[OFF/ON]

Runs motor with 25512 rpm.

5-804-106

Polygon Motor: H

ENG

[OFF/ON]

Runs motor with 30236 rpm.

5-804-107

 

Polygon Motor: HH

ENG

[OFF/ON]

Runs motor with 34488 rpm.

5-804-109ExhaustCooling Fan: Half SpeedENG[OFF/ON]
Moves exhaust cooling fan.

5-804-110

Fusing Fan: Full Speed

ENG

[OFF/ON]

Moves fusing exhaust heat fan.

5-804-111

 

Fusing Fan: Half Speed

ENG

[OFF/ON]

Moves fusing exhaust heat fan.

5-804-112PSU Coolingt Fan: Half SpeedENG[OFF/ON]
Moves PSU cooling fan.

5-804-113

PSU Coolingt Fan

ENG

[OFF/ON]

Moves PSU cooling fan.

5-804-114

Ozone Fan

ENG

[OFF/ON]

Moves ozone exhaust heat fan.

5-804-115

Exhaust Cooling Fan

ENG

[OFF/ON]

Moves exhaust cooling fan.

5-804-116

Development: Right: Half Speed

ENG

[OFF/ON]

Moves development intake fan.

5-804-117

Drive Cooling/ Main/ Toner Supply Cooling Fan

ENG

[OFF/ON]

Moves drive cooling fan (not included in this machine), main exhaust fan (not included in this machine), and toner supply cooling fan.

5-804-118

Development: Right

ENG

[OFF/ON]

Moves development intake fan.

5-804-119

Development Solenoid

ENG

[OFF/ON]

Moves development solenoid.

*C3500/C3000/C2500/C2000 only

5804

[OUTPUT Check]

Moves develop motor.

5-804-120

Development Motor K: Standard Speed

*C6000/C5500/C4500 only

ENG

[OFF/ON]

5-804-121

Development Motor K: Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-122

Development Motor K: Low Speed

*C6000/C5500/C4500 only

ENG

5-804-128

Development Motor FC: Standard Speed

ENG

5-804-129

Development Motor FC: Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-130

Development Motor FC: Low Speed

ENG

5804

[OUTPUT Check]

Moves/Stops drum motor FC.

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-132

Drum Motor FC: Standard Speed

ENG

[OFF/ON]

5-804-133

Drum Motor FC: Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-134

Drum Motor FC: Low Speed

ENG

5804

[OUTPUT Check]

Moves/Stops transfer drum motor K.

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-136

Transfer Drum Motor K: Standard Speed

ENG

[OFF/ON]

5-804-137

Transfer Drum Motor K: Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-138

Transfer Drum Motor K: Low Speed

ENG

5804

[OUTPUT Check]

Moves paper transfer divide motor.

5-804-140

PTR Contact Motor:CW

ENG

[OFF/ON]

5-804-141

PTR Contact Motor:CCW

ENG

5804

[OUTPUT Check]

Moves image transfer divide motor (reverse to toner supply motor M).

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-150

Toner Supply Motor M:CW:(ITB Contact)

ENG

[OFF/ON]

5804

[OUTPUT Check]

Moves relay carry motor (bridge unit)/left paper exit carry motor (left paper exit tray).

5-804-163

Bridge Relay/Left Exit Motor: Normal Speed

ENG

[OFF/ON]

5-804-164

Bridge Relay/Left Exit Motor: Middle Speed

*C6000/C5500/C4500 only

ENG

5-804-165

Bridge Relay/Left Exit Motor: Low Speed

ENG

5-804-166

Bridge Relay/Left Ex Mt: Normal Speed Upper

ENG

5804

[OUTPUT Check]

5-804-169

Bridge Junction/Left Exit Junction Solenoid

ENG

[OFF/ON]

Moves relay divide solenoid (bridge unit)/left paper exit divide solenoid (left paper exit tray).

5-804-170

Shift Tray Motor:CW

ENG

[OFF/ON]

Moves shift tray motor.

5-804-171

Shift Tray Motor:CCW

ENG

[OFF/ON]

Moves shift tray motor.

5-804-172

Toner End Sensor: K Power

ENG

[OFF/ON]

Supples power to toner end sensor (K).

5-804-174

Drum PCL: K

ENG

[OFF/ON]

Lights (PWM drive) the drum PCL (K).

* Continuing the OPC's exposure, it might accumulate damage due to electrostatic locally.

  • If operating QL without rotation, be sure to stop it within 10 seconds.
  • Do rotate the OPC drum when QL is turned on.

*C2500/C2000 only

5-804-175

Drum PCL: FC

ENG

[OFF/ON]

Lights (PWM drive) the drum PCL (FC).

* Continuing the OPC's exposure, it might accumulate damage due to electrostatic locally.

  • If operating QL without rotation, be sure to stop it within 10 seconds.
  • Do rotate the OPC drum when QL is turned on.

*C2500/C2000 only

5804

[OUTPUT Check]

Outputs PWM for electrify HVP (DC/AC:Y/M/C/K).

If you enable this SP when the drum is suspended, the drum surface picks up a static charge, resulting in horizontal banding. It is recommended to enable this SP with the PCDU removed.If enabling this SP with the PCDU installed, be sure to enable it only for a short time and check that image quality degradation does not occurred after that. If horizontal banding occurs, it is resolved by printing and then leaving the machine idle for a while. If the problem persists, replace the PCU.

5-804-176

PP: Charge DC: Y

ENG

[OFF/ON]

5-804-177

PP: Charge DC: M

ENG

5-804-178

PP: Charge DC: C

ENG

5-804-179

PP: Charge DC: K

ENG

5-804-180

PP: Charge AC: Y

ENG

5-804-181

PP: Charge AC: M

ENG

5-804-182

PP: Charge AC: C

ENG

5-804-183

PP: Charge AC: K

ENG

5804

[OUTPUT Check]

Outputs PWM for develop HVP.

If you enable this SP when the drum is suspended, the drum surface picks up a static charge, resulting in horizontal banding on printed image or adhesion of carrier to the drum surface. It is recommended to enable this SP with the PCDU removed.

5-804-184

PP: Development: Y

ENG

[OFF/ON]

5-804-185

PP: Development: M

ENG

5-804-186

PP: Development: C

ENG

5-804-187

PP: Development: K

ENG

5804

[OUTPUT Check]

Outputs PWM for transfer HVP (image transfer: Y/M/C/K).

The image transfer bias involves constant current control, so if you enable this SP when the image transfer belt is not operating or not installed, there is a risk of HVP error. When enabling this SP, it is recommended to keep its operation time within 2 seconds.

5-804-195

PP: ITB: Y

ENG

[OFF/ON]

5-804-196

PP: ITB: M

ENG

5-804-197

PP: ITB: C

ENG

5-804-198

PP: ITB: K

ENG

5804

[OUTPUT Check]

Outputs PWM for transfer HVP (paper transfer: +/-).

5-804-199

PP: PTR: +

ENG

[OFF/ON]

5-804-200

PP: PTR: -

ENG

5804

[OUTPUT Check]

5-804-202

Scanner Lamp

ENG

[OFF/ON]

Checks output of scanner lamp.

Use to check light source malfunction when SC101-01, SC101-02, SC102-00, SC142-00 occurs.

5-804-206

PTR Open/Close LED

ENG

[OFF/ON]

Lights paper transfer open/close LED.

5-804-208

TM/P Sensor: F

ENG

[OFF/ON]

Lights TM/P sensor: Front glowing part.

5-804-209

TM/P Sensor: C

ENG

[OFF/ON]

Lights TM/P sensor: Center glowing part.

5-804-210

TM/P Sensor: R

ENG

[OFF/ON]

Lights TM/P sensor: Rear glowing part.

5-804-211

Toner Sensor Power

ENG

[OFF/ON]

 

5-804-232

Toner IDTAG Power

ENG

[OFF/ON]

 

5804

[OUTPUT Check]

5-804-235

Fusing Shading Plate M: CW

ENG

[OFF/ON]

Moves shade plate of fusing Md to CW direction.

* Execute this SP after removing the fusing unit.

Continuing to turn the fusing shield drive motor while attaching the fusing unit, the units may be damaged.

Procedure:

  1. Remove the fusing unit.
  2. Remove the waste tonner bottle.
  3. Execute this SP.

*C6000/C5500/C4500 only

5-804-236

Fusing Shading Plate M: CCW

ENG

[OFF/ON]

Moves shade plate of fusing Md to CCW direction.

* Execute this SP after removing the fusing unit.

Continuing to turn the fusing shield drive motor while attaching the fusing unit, the units may be damaged.

Procedure:

  1. Remove the fusing unit.
  2. Remove the waste tonner bottle.
  3. Execute this SP.

*C6000/C5500/C4500 only

5-804-239

Fusing Exit Drive Solenoid

ENG

[OFF/ON]

 

5804

[OUTPUT Check]

Continuously drives specified motor for operation test.

5-804-241

Bank: Tray3: Feed Mt: Standard Speed

ENG

[OFF/ON]

5-804-242

Bank: Tray4: Feed Mt: Standard Speed

ENG

5-804-243

Bank: Tray5: Feed Mt: Standard Speed

ENG

5-804-244

Bank: Tray3: Transport Mt: Standard Speed

ENG

5-804-245

Bank: Tray4: Transport Mt: Standard Speed

ENG

5-804-246

Bank: Tray5: Transport Mt: Standard Speed

ENG

5804

[OUTPUT Check]

Drives specified motor for a certain period of time to test operation.

5-804-247

Bank: Tray3: PU Solenoid

ENG

[OFF/ON]

5-804-248

Bank: Tray4: PU Solenoid

ENG

5-804-249

Bank: Tray5: PU Solenoid

ENG