Perform the following procedure to enable the client machine(s) to receive faxes via the remote machine. You can forward or route received documents per line or to a specific sender.

  • Before starting this procedure, connect the network cable to the target machine(s), and then configure the network settings.
  • By performing procedures #1-3 above, the client machines can send faxes via the remote machine. The procedures shown below are necessary to enable the client machines to receive faxes.

This procedure is performed on the remote machine.

Using "Remote Reception Setting per Line"
  1. Press [Facsimile Features].
  2. Press [Remote Reception Setting per Line] in [Reception Settings].
  3. Enter an IP address or a host name of the client-side machine to connect.
  4. Press [Set], and [Exit] to exit from the setting.
Using "Remote Reception per Sender"
  1. Press [Facsimile Features].
  2. Press [Program Special Sender] in [Reception Settings].
  3. Select the Special Sender.
  4. Press [Remote Reception Setting per Sender].
  5. Press [On] and [Remote machine].
  6. Enter an IP address or a host name of the client machine to connect.
  7. Press [OK] to exit from the setting.