This procedure is needed only for machines with ARDF DF3090.

  1. Open the ARDF original cover and stamp holder [A].
  2. Install the fax stamp [A] provided with the machine.
  3. Close the holder.
    Make sure that the holder is pushed into the position where the marks on the holder and the exterior cover face each other. If not, jam detection (J001) will occur.
  4. Close the ARDF.
  5. As an operation test, place the original on ARDF tray, and send it with the memory sending/fax stamp function ON.
    • Set the sending time to a time when nobody uses the machine (such as 11 PM).
    • Check if the fax stamp is marked on the trailing edge of the original.