The optional handset is available for NA only.

  1. Open the front cover [A].
  2. Remove the paper exit tray [A].
  3. Remove the upper left cover [A] (×1).
    Slide the cover in the direction of the blue arrow.
  4. Remove the hooks [A], and remove the left rear cover [B].
  5. Remove the scanner front cover [A].
  6. Remove the scanner left cover [A](×2).
  7. Make two holes in the scanner left cover.
  8. Reattach the scanner left cover ( x 3).
  9. Re-assemble the machine.
  10. Attach the bracket [A] enclosed with the fax unit ( x 2: M3 x 12) as shown.
    For machines with the single pass ADF, the bracket can be attached slanted using the hole [B].
  11. Attach the cradle [A] to the handset bracket ( x 2).
  12. Make two loops with the telephone cord, and then attach the ferrite core [A] to the cable.
  13. Connect the cable to the "TEL" jack [A] on the left side of the controller box.