1001 | [Scan Nv Version] | ||
1-001-005 | - | *CTL | [- / - / -] |
1005 | [Erase Margin(Remote scan)] | ||
1-005-001 | Range from 0 to 5 mm | *CTL | [0 to 5 / 0 / 1 mm / step] |
1009 | [Remote scan disable] | ||
1-009-001 | - | *CTL | [0 or 1 / 0 / 1 / step] 0: ON (enabled) 1: OFF (disabled) |
1010 | [Non Display Clear Light PDF] | ||
1-010-001 | - | *CTL | [0 or 1 / 0 / 1 / step] 0: Display, 1: No display |
1011 | [Org Count Display] | ||
1-011-001 | - | *CTL | [0 or 1 / 0 / 1 / step] 0: OFF (no display) 1: ON (count displays) |
1012 | [User Info Release] | ||
1-012-001 | - | *CTL | [0 or 1 / 1 / 1 / step] 1: Release 0: Do not release |
1013 | [Scan to Media Device Setting] | ||
1-013-002 | - | *CTL | [0 or 1 / 1 / 1 / step] 0: Disable 1: Enable |
1014 | [Scan to Folder Pass Input Set] | ||
1-014-001 | 0: OFF 1: ON | *CTL | [0 or 1 / 0 / 1 / step] 0: OFF 1: ON |
1041 | [Scan:FlairAPI Setting] | ||||
1-041-001 | 0x00 – 0xff | *CTL | * see BitSwitch below: | ||
Sets Scanner FlairAPI Function enable / disable. This SP is set by BitSwitch and needs to reboot the machine after making changes. | |||||
bit | Setting | meanings | Description | ||
0 | 1 | ||||
bit 0 | Start of FlairAPI Server | Off (Do not Start) | On (Start) | Sets whether to start exclusive FlairAPI http server. If it is 0, scanning FlairAPI function and simple UI function will be disabled. | |
bit 1 | Access permission of FlairAPI from outside of the machine | Disabled | Enabled | If it is “0”, accessing is limited from the machine only, such as operating panel, SDK/J, MFP browsers etc… If it is “1”, accessing is allowed from outside of FlairAPI such as PC, Remote UI, IT-Box etc… | |
bit 2 | IPv6 (Exclusive) / IPv4 (Priority) Switching | IPv6 (Exclusive) | IPv4 (Priority) | If this bit is “0”, only IPv6 accessing is permitted. If this bit is “1” and IPv4 is enabled, the machine uses IPv4 accessing. If this bit is “1” and IPv4 is disabled, the machine uses IPv6 accessing. In this case, it is unable to access through Smart Operation Panel if IPv4 address is enabled. | |
bit 3 | Remote UI Function | Not Used | Use | Sets use of Remote UI for scanner function. | |
bit 4 | Reserved | - | - | - | |
bit 5 | Reserved | - | - | - | |
bit 6 | Reserved | - | - | - | |
bit 7 | Reserved | - | - | - | |