Printing Test pattern: SP2-109
Some of these test patterns are used for copy image adjustments but most are used primarily for design testing.
- Do not operate the machine until the test pattern is printed out completely. Otherwise, SC will occur.
- Enter the SP mode then select SP2-109-003.
- Select test pattern for print from the list then press [OK].
When changing density of test pattern, select density with SP2-109-006.
- If select "0" with SP2-109-006, the color adjusted so will not show up in the test pattern.
To print, touch "Copy Window", then set settings within the following window for test print (paper size etc…).
- Press "Start" key to start test print.
- After checking test pattern, touch "SP Mode" on the LCD to return to SP mode display.
- Reset all settings to the default values.
- Exit SP mode.
No. | Pattern | No. | Pattern |
|---|---|---|---|
0 | None | 13 | 4dot Ind. Pttrn (4dot independent Pattern) |
1 | 1dot Vertical Line | 14 | Trimming Area |
2 | 2dot Vertical Line | 15 | Hounds tooth H |
3 | 1dot Horizontal Line | 16 | Hounds tooth V |
4 | 2dot Horizontal Line | 17 | Black Band H (Horizontal) |
5 | Grid Vert (Grid Vert ical Line) | 18 | Black Band V (Vertical) |
6 | Grid Horizontal (Grid Horizontal Line) | 19 | Checker Flag Pattern |
7 | Grid Pattern Small | 20 | Grayscale V (Vertical) |
8 | Grid Pattern Large | 21 | Grayscale H (Horizontal) |
9 | Argyle Pattern Small | 22 | 2 Beam Density Pttrn |
10 | Argyle P:L (Argyle Pattern Large) | 23 | Full Dot Pattern |
11 | 1dot Ind. Pttrn (1dot independent Pattern) | 24 | All White Pattern |
12 | 2dot Ind. Pttrn (2dot independent Pattern) |
|
|