Fourth, Fifth Fold Rollers

Rear upper cover (Rear Upper Cover)

Rear lower cover (Rear Lower Cover)

Drawer stopper [A] ( x 1)

Remove the links [A] on the front side.

Remove four gears [B]. ( x 1)

Remove the links [A] (pin x 1 each)

Remove the gears [B] and [C] ( x 1, timing belt x 1).

Remove the tension bracket [A] (spring [B] x 1, x 1).

Left lower bracket ( x 6)

Lift up the hook [A] to release the guide plate shaft [B].

Move the guide plate shaft [B] to the front (arrow direction), and then remove the guide plate [C].

Remove the cam [A] on the front.

Fold roller fixing front plate [B] ( x 3)

2nd fold motor [A] (2nd Fold Motor)

2nd fold pulley gear [B] ( x 1) and idle gear

Timing belt [C]

Spring [D]

FM6 pawl motor [E] (FM6 Pawl Motor)

Pulley gear [F]

1st fold motor [A] (1st Fold Motor)

FM6 pawl HP sensor bracket [B]

FM6 pawl cam gear [C]

Release the tension bracket [D], and then remove the transmission pulley gear [E] (pin x 1)

Remove the entrance guide plate [A] at the 2nd fold unit ( x 4).

Hold the fourth fold roller cam [A] at the rear of the drawer unit.

Pull the fourth fold roller [B] to the front .

Keep the FM6 pawl [C] open, and then remove the fourth fold roller .

Remove the fifth fold roller [A].