1. Folding unit cover (Folding Unit Cover)

  2. Rear upper cover (Rear Upper Cover)

  3. Rear lower cover (Rear Lower Cover)

  4. Disconnect the bypass entrance paper sensor harness [A] from the connector [B] (x 1, x 2).

  5. Remove the clip [A] for the bypass entrance guide plate.

  6. Remove the guide plate [A].

    • Remove the embossed part at the front by pushing the guide plate to the rear.
    • Remove the embossed part at the rear by sliding the guide plate to the left.

  7. Bypass entrance paper sensor bracket [A] ( x 1)

  8. Bypass entrance paper sensor [A] ( x 1, x 1, x 1)

    • Reinstalling the bypass entrance paper sensor:
    • Put the harness of the bypass entrance paper sensor through the hole [A] in the rear frame of the drawer.