1. 1st stopper unit (1st Stopper Unit)

  2. Jam removal door (Registration Sensor)

  3. Remove two screws [A] at the rear side of the folding unit drawer.

  4. Remove the spring [A] and solenoid spring [B].

  5. Remove the arm [C].

  6. Release the clamp [A] and disconnect two connectors [B].

  7. Pull out the folding unit drawer. (Pulling Out the Folding Unit Drawer)

  8. Top stay [A] ( x 3)

  9. Move down the 2nd stopper unit [A] a little bit ( x 2).

  10. Open the jam removal door [A]. (hook [B])

  11. Remove the 2nd stopper unit [C].