1. Undock the stacker from the upstream unit. Release the stand.
  2. Remove the right front cover (x3).
  3. Remove the spacers (x1).

    [A]: Spacer

  4. Loosen the screws on the docking bracket and insert the spacer under the end (either the right or left end) of the docking bracket. Then, secure the docking bracket.


    [A]: Upstream unit
    [B]: Docking bracket

    The thickness of the spacer is 2mm. Insert the required number of spacers (up to 2).

  5. Dock the stacker to the docking bracket and check the skew. If the skew is 1 or more division, do the adjustment procedure again.
  6. If there is no problem, re-attach the right front cover and dock the stacker to the upstream unit. Secure the stand.