Shift Tray Exit Unit

Preparation

Remove these parts:

• Rear lower cover (Rear Lower Cover, Rear Upper Cover)
• Rear upper cover (Rear Lower Cover, Rear Upper Cover)
• Jogger unit (Jogger Unit Removal)

Common

1. Remove the plate [A] (x4)
   

2. Release the clamp and disconnect the five connectors as shown and noted below. (x1, x5)
   

   

   Disconnect the white and gray harness connectors, and the three purple harness connectors (twelve, seven, and four pins) as shown in the diagram below.

   

3. Release the six clamps. (x6)
   
4. Remove the inner cover [A]. (x2)
   
5. Remove the bracket [A]. (x4, x1)
   
6. Remove the shift tray exit unit [A]. (x3)