Front-to-Rear Adjustment

Right Side

1. Remove:
   
   • Top door (Top Door)
   • Front right cover (Front Right Cover)
   • Right inner cover (Right Inner Cover)
2. Remove the right vertical stay [A] (x4,x1)
   
3. Remove the screws of the front door switch bracket [A] (x2). You do not need to remove the bracket.
   
4. Loosen the tension on the belt:
   
   • Loosen screw [A].
   • The tension bracket [B] will rise.
   • Tighten screw [A].
   
5. Adjust the belt:
   
   • If the front end is low, pull up the left side of the belt [1] to raise the front.
   • If the front end is high, pull up the right side of the belt [2] to lower the front.
   • Every notch adjustment (you will be able to hear it click) adjusts the height of the front by 5 mm.
   
6. Re-set the belt tension:
   
   • Loosen screw [A].
   • Pull down the spring [B] to apply tension to the belt.
   • Tighten screw [A] with the bracket pulled down.
   

Left Side

1. Remove:
   
   • Top door (Top Door)
   • Front door (Front Door)
   • Front left cover (Front Left Cover)
2. Loosen the tension on the belt:
   
   • Loosen tension screw [A].
   • The tension bracket [B] will rise.
   • Tighten screw [A].
   
3. Adjust the belt:
   
   • If the front end is low, pull up the left side of the belt [1] to raise the front.
   • If the front end is high, pull up the right side of the belt [2] to lower the front.
   • Every notch adjustment (you will be able to hear it click) adjusts the height of the front by 5 mm.
   
4. Set the belt tension:
   
   • Loosen screw [A].
   • Pull down the spring [B] to apply tension to the belt.
   • Tighten screw [A] with the bracket down.