1. Remove the rear lower cover and rear upper cover (Rear Lower Cover, Rear Upper Cover)
  2. Remove the right inner cover (Right Inner Cover)
  3. Remove the left inner cover (Left Inner Cover)
  4. At the rear, remove three screws and disconnect five connectors (x3, x5).
  5. Remove the center plate [A] and right plate [B] (x1 each).
  6. Remove the four steel jogger unit legs.
  7. Remove the lock plate [A] (x2)
  8. Disconnect the jogger unit (x3).
    The jogger unit is held in place by four hooks. It will not fall after the screws have been removed.
  9. Screw each leg removed in step 6 into the bottom of the jogger unit.
  10. Grip one leg at the front , and one at the rear .
  11. Push the jogger unit to the left to disengage the hooks.
  12. Slowly lower the jogger unit to the right and pull it out of the stacker.
  13. Set the jogger unit on a flat surface.