Fusing Unit Off Mode (Energy Saving)

Overview

You can set Fusing Unit Off mode on "Fusing Unit Off Mode (Energy Saving) On/Off" in "Timer Settings" menu under "System Settings" from "Machine Features" screen. You can access the "Machine Features" screen with the following procedure below.

• Pro C5200S/C5210S:
  • When using the standard operation panel: Press the "User Tools" key.
  • When using the smart operation panel: Press the "User Tools" icon, and then press "Machine Features".
• MP C6503/C8003: Press the "User Tools" icon, and then press "Machine Features".

Details

You can specify whether Fusing Unit Off mode is enabled or not. When Fusing Unit Off mode is enabled, the display is on but the fusing unit is off to save energy. The machine requires roughly the same time as warm-up time to recover from Fusing Unit Off mode. The default setting is "Off".

• If "Fusing Unit Off Mode (Energy Saving) On/Off" is set to "On", you can specify when to exit Fusing Unit Off mode and the time to elapse before entering Fusing Unit Off mode.
• If "Exit Fusing Unit Off Mode" is set to "On Printing", the machine exits Fusing Unit Off mode when printing is performed.
• If "Exit Fusing Unit Off Mode" is set to "On Operating Control Panel", the machine exits Fusing Unit Off mode when a key other than the copy function key is pressed on the control panel of the machine.

If printing is performed with the copy function or a key in the copy function is pressed on the control panel of the machine, the machine exits Fusing Unit Off mode regardless of this setting. If the timer is set to [On], you can set the time from 10 seconds to 240 minutes, using the number keys.